Manual Rubber and Aluminum Plug Press Machine for 60138 Supercapacitor

This supercapacitor sealing machine is used for 60138 supercapacitor final sealing process after the grooving and pre-sealing process.

The supercapacitor cells(Jelly roll) flatting machine is mainly suitable for battery and supercapacitor cells shaping, so that the positive and negative end faces are compact and flat, and it is convenient for laser welding with the upper and lower electrode.

The battery electrolyte filling machine is used for the electrolyte injection process of supercapacitor. Adopt vacuum first, electrolyte injection later and then add pressure, the electrolyte absorption is high consistent, reliable and complete.

The grooving and pre-sealing machine is used for 60138 supercapacitor top and bottom grooving, and top pre-sealing process.

This TOB-RK60 supercapacitor cell feeding machine is suitable for 60138(60130) supercapacitor (after the electric cell is welded and the o-ring of the upper cover is assembled) to be pressed into the inside of the shell, and the o-ring sealing ring is fastened inside.

This TOB-LW-Series laser welding machine is suitable for the welding process of threaded terminal supercapacitor top current collector, bottom current collector, cap and filling port laser welding.

Product Name: Lithium foil (lithium battery grade) Notice Lithium metal belongs to dangerous goods.  To ensure the timeliness of quotation and transportation.  Please mark the thickness, width and receiving information in the inquiry before you order the lithium metal product. SPECIFICATIONS (MOQ 100g) Molecular formula      Li  Melting point  180.5℃ Smell     Tasteless  Density  0.534g/cc PH (1%solution 25℃) >12  Formula weight  6.94 Surface  Silvery white       Element Content (%) Item Test result Item Test result K 0.0005 Al 0.0004 Na 0.001 Ni 0.003 Ca 0.003 Cu 0.0004 Fe 0.0005 Mg 0.0005 Si 0.0005 Cl 0.001 N 0.004 Li >99.9   Size Standard (mm)  Item          Standard          Error       Test result Width          55mm          ± 0.2mm     55.04~55.10mm Thickness          0.1mm          ± 0.01mm      0.102~0.109mm   Surface quality Surface lithium belt should be straight, bright, there should be no oil or other debris, no oxide and nitride visible, should not be ruffled, holes, cracks, crease, To allow a slight processing stripes and roller. The lithium belt edge should be neat, no cracks. Lithium belt without delamination and inclusion. Packing Lithium strip winding on the winding wheel, In the dry environment filled with argon sealing packing. Out packing is metal bucket sealing.  Handling and storage  Handling of lithium belt should be in an inert gas or in dry air, lithium belt save for a period of six months.  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

Cold press automatic detection system