Manual Rubber and Aluminum Plug Press Machine for 60138 Supercapacitor

This supercapacitor sealing machine is used for 60138 supercapacitor final sealing process after the grooving and pre-sealing process.

The supercapacitor cells(Jelly roll) flatting machine is mainly suitable for battery and supercapacitor cells shaping, so that the positive and negative end faces are compact and flat, and it is convenient for laser welding with the upper and lower electrode.

The battery electrolyte filling machine is used for the electrolyte injection process of supercapacitor. Adopt vacuum first, electrolyte injection later and then add pressure, the electrolyte absorption is high consistent, reliable and complete.

The grooving and pre-sealing machine is used for 60138 supercapacitor top and bottom grooving, and top pre-sealing process.

This TOB-RK60 supercapacitor cell feeding machine is suitable for 60138(60130) supercapacitor (after the electric cell is welded and the o-ring of the upper cover is assembled) to be pressed into the inside of the shell, and the o-ring sealing ring is fastened inside.

This TOB-LW-Series laser welding machine is suitable for the welding process of threaded terminal supercapacitor top current collector, bottom current collector, cap and filling port laser welding.

Copper foam battery cathode Board (length 300 mm * 200 mm width * 1.6 mm thick) SPECIFICATIONS 1 A great feature of electric conductivity can be used as heat and lithium-ion batteries or batteries or nickel-zinc batteries and electric double-layer capacitor electrode material substrate 1 copper foam. 2 Copper foam can be used as a heat sink materials, heat-absorbing material, chemical catalyst support, electromagnetic shielding materials, filtration, damping material, battery electrode materials, noise, high grade decorative material. Material: the purity > 99.99% are sold in copper foam sheet or roll. Dimensions: 200 * 300 * 1.6 mm And customized to required thickness: 1.6 mm Aperture: 0.1 mm Porosity： ≥98 ％ (110 inch per size of pores, holes is about 0.1 mm in diameter) Through-hole rate： ≥98 ％ Bulk density: 0.1-0.8g/cm3 Before rolling the surface density： 350 g/m ^2 Packaging and shipping 1 Standard export package: internal bottle sealing and sealingaluminum - plastic composite film outer 2 Most suitable for your requirements, by express shipping delivery mode Services Provides the machine with the air 1 battery technology support by the sea and by suggesting. 2 For we are also able to supply a complete set of polymer batteries including the cylindrical batteries, cell phone battery, Li-ion battery materials for EV battery. 3 We can also supply a complete set of lab research, pilot-scale research and lithium battery production line equipment. 4 We can also supply a complete set of cell design, research, production and battery technology. We are cooperating with each other, we got the top of the best battery  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

BM-451B water-based SBR binder: 40.0 wt% solid content, high adhesion, low addition amount, excellent low-temperature performance for lithium-ion and sodium-ion battery anodes.