-
Lithium-ion Battery Anode Material Classification As one of the key materials for lithium-ion batteries, negative electrode materials need to meet multiple conditions. The Li intercalation and deintercalation reaction has a low redox potential to satisfy the high output voltage of lithium-ion batteries. During the process of Li intercalation and deintercalation, the electrode potential changes lit...
read more
-
Areal density（mg/cm2）：Areal density refers to the mass per unit area, which in this case is (the mass per unit area ofthe region ignoring the volume). Compacted density（g/cm3）：The compacted density indicates the mass contained in a unit volume, which has a lot to do with the properties of the material itself. Thickness：The total thickness of the material and the foil is generally expressed in micr...
read more
-
The inconsistency of energy storage batteries mainly refers to the inconsistency of parameters such as battery capacity, internal resistance, and temperature. Our daily experience is that when two dry batteries are connected in positive and negative directions, the flashlight will light up, and we don’t consider consistency. However, once batteries are used on a large scale in energy storage syste...
read more
-
The stability and dispersibility of battery slurry have an important impact on the properties of electrodes and finished battery products. So how to characterize the stability and dispersibility of battery slurry? Characterization method of battery slurry stability 1. Solid content method The solid content test method is a low-cost and easy-to-test method. Its principle is to place the slurry in a...
read more
-
WANG Kunpeng ,1, LIU Zhaolin2, LIN Cunsheng2, WANG Zhiyu ,1,2 1. State Key Lab of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China 2. Branch of New Material Development, Valiant Co., Ltd., Yantai 265503, China Abstract In comparison to Li-ion batteries, Na-ion batteries offer the benefits of low cost, good low-temperature performance, and safety...
read more
-
When designing lithium-ion batteries, the choice of battery casing material is critical. It must not only protect the battery's internal electrochemical components and structure but also possess properties like heat resistance, corrosion resistance, vibration resistance, and crush resistance. Among numerous materials, aluminum shells have emerged as the preferred choice due to their unique advanta...
read more
-
Lithium-ion batteries (LIBs) are the powerhouse of modern electronics and electric vehicles (EVs), and their performance hinges on the cathode materials. Among these, ternary cathode materials such as NCM (Nickel-Cobalt-Manganese oxides) and NCA (Nickel-Cobalt-Aluminum oxides) dominate due to their balanced energy density and stability. However, varying the ratios of nickel (Ni...
read more
-
The voltage of a lithium battery is closely related to the electrode potentials of its cathode and anode materials. Variations in voltage among lithium batteries using different materials primarily stem from the following factors: Impact of Electrode Materials’ Chemical Properties Lithium batteries operate through the movement of lithium ions between the cathode and anode during charging and disch...
read more
-
In lithium-ion battery manufacturing, the fineness of the slurry (mainly referring to the electrode slurry) is a key parameter affecting electrode performance (such as capacity, rate capability, cycle life, safety) and process stability. Different battery types have significantly different fineness requirements for the slurry (usually measured by particle size distribution indicators such as D50, ...
read more
-
I. Characteristics and Advantages of Polyacrylate (PAA) Binders Minimal Swelling in Electrolyte Solvents: Exhibits low swelling, maintaining structural integrity of electrode sheets during charge/discharge cycles. High Proportion of Carboxyl Groups: The high density of polar carboxyl groups forms strong hydrogen bonds with hydroxyl-containing active materials, enhancing dispersion stabil...
read more
-
Self-discharge in lithium-ion batteries refers to the phenomenon where the battery's charge/voltage naturally decreases when disconnected from an external circuit (i.e., in an open-circuit state). This is an inherent characteristic of all batteries, though the degree varies. Lithium-ion batteries exhibit a relatively low self-discharge rate but are still affected. The primary causes can be categor...
read more
中文
français
Deutsch
italiano
español
português
Nederlands
日本語
한국의
subscribe to us 
