EV Power Prismatic Battery Electrodes Laser Cutting and Winding Machine

This TOB-HEV220A prismatic cell auto winding machine is used in the winding process of the prismatic cell and is a fully automatic operation equipment.

It is a special tablet pressing machine for powder such as medicine powder, chemical preparation and so on. It is an ideal equipment for the laboratory to do scientific research in enterprises, colleges and universities.

Lithium Nickel Cobalt Aluminum Oxide (NCA) Powder Material Supplier.

Surface Area and Pore Size Analyzer For Powder Material Research SPECIFICATIONS Power Voltage: 100V~220V ± 10V  Frequency: 50/60Hz Maximum power: 300W Connection: grounding, single-phase power socket Physical properties Length: 60cm (23.6 inches) Width: 48cm (18.9 inches)   Height: 74cm (29.1 inches) Weight: 60kg (132.3 lbs) Accessories Weight: 30kg (66.1 lbs )  Installation requirements (L * W) 100 * 60cm (not including space computers taking up) Functions  ● Surface area measurement: BET surface area (Single-point and multi-point), Langmuir surface area, T-plot method outer surface area,  T-plot method the total inner surface area of microporous, BJH adsorption cumulative surface area of the total pore, BJH desorption cumulative surface area of the total pore ● Determination of pore volume: Single point total pore volume,BJH adsorption cumulative total pore volume    BJH desorption cumulative total pore volume    T-plot method the total pore volume of micropore ● Determination of average pore size:    Adsorption average pore diameter   BJH adsorption average pore diameter   BJH desorption average pore diameter   The most frequency pore ● Pore size distribution:   BJH adsorption and desorption differential pore size distribution (dV / Dr-D) and (dV / dlogD-D)   BJH adsorption and desorption integral distribution (or cumulative distribution)   MP method micropore distribution Technical Parameters Test principle: the static volumetric method, gas adsorption; Analysis Models: BET, Langmuir, BJH, t-plot, DR, MP and NLDFT; Measuring range: surface area ≥ 0.005M2/g, no upper limit; pore size 2 _ 500nm; pore volume 0.0001cc/g, no upper limit; Sorption gas: N2 (high purity); Ar, Kr, CO2, etc. available Analysis No: Two independent analysis ports  Degassing stations: Two Sample Type: powders, granules, fibers, flakes and other materials  Sensor：Two sensors, 0_1000 torr P.S (0_133kpa);  Test Efficiency: multi-point BET surface area _12 minutes per sample; Determination pore size distribution from adsorption isotherms _1.5h per sample;  Determination pore size distribution from adsorption and desorption isotherms _3.5 h per sample. Nitrogen Partial Pressure: P/Po 4×10-5 _ 0.998, the minimum resolvable relative pressure  5 × 10-5 Ultimate vacuum: 4.0 × 10-2Pa（3×10-4  torr） Pressure Accuracy: ≤ ± 0.15% (F.S) Repeatability accuracy: surface area ≤ ±1.0 % （surface area）;  ≤2nm (pore size) Operation Mode: Automatic  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

BTS series high-precision battery testing machine system Scope:comprehensive performance testing for lithium polymer, lithium ion, nickel metal hydride, nickel cadmium, lead-acid battery of ; battery materials research; small quantities of cell production and capacity into sorting; combination of battery, laptop battery testing.

1200℃Intelligent Chamber Atmosphere Furnace The vacuum system of the atmosphere furnace adopts special design technology, which ensures safe and convenient operation, good vacuum degree, and an ultimate vacuum degree of up to 100PA. It also boasts good sealing performance and long vacuum holding time.

The TOB-SDY-50 sealed drying room is mainly composed of sealed stainless steel box, rotating wheel dehumidifier, water removal purification system, cooling system, sealed stainless steel pipeline and electric control system.

Thickness: 0.01mm~ can be customized. Width: Can be customized 5~200mm.