Effective Volume

216L

Inner Dimension

W600*H600*D600 mm *2

Overall Dimension

W1300*H1765*D1085mm

Kindly remark：exact overall dimension please refer to the final design drawing !

Working system

Each chamber can work independently with independent controller

Condition

Air cooling type under environment temp.+5℃～+35℃,relative humidity≤85%。No load(without specimen in the testing zone)

Temp. Range

RT+10℃~+150℃

Temp. Fluctuation

≤±0.5℃

Temp. Deviation

≤2.0℃

Temp. Uniformity

≤±2.0℃

Temp. Heating Time

 RT+10~100℃about 10 mins.

Weight

About 550kg

Power

AC 415V, 50HZ, 6.8KW.

Noise

≤75db ( 2m far away from the equipment)

External Chamber

Cold roll steel with painting

Internal Chamber

SUS#304 high &low temperature resistance stainless steel.

Bottom with 2mm thick #304 stainless steel

Insulation Material

100mm PU Polyurethane foam insulation material

Chamber Door

Single door,single observation,

Observation Window

With vacuum glass observation window on the door ;and door frame with electric heat resistant, anti-frosting, anti-condensing devices, ensures clear observation of the specimen under testing.

Testing Hole

Total 2 piecesΦ100mm testing hole on side of the chamber, with silicon seal and stainless steel cover.

Sealing

Adopt original imported silicon rubber strip, with high sealing performance.

Sample holder

insulation sample holder ,2 layers(total 4 layers) , loading capacity＞30KG/layer.

Lighting inside chamber

With each 1 set of energy saving light inside the observation window

Pressure Balance Port

Installed mechanical pressure close type balance adjustment device to avoid pressure difference influence the test chamber strength when do high temp. test.

Wheels

4 sets universal wheels and 4 fixing casters, available for free moving and fixing.

Remark

1.Tri-color light alarm device.

2.Automatic explosion-proof pressure relief device.

3.Explosion proof chain each 2 pieces on the side of each chamber.