battery machine and materials solution
Products

Categories

Hot Products


Prismatic Cell Sealing Machine
Loading...
Prismatic Cell Sealing Machine Prismatic Cell Sealing Machine Prismatic Cell Sealing Machine Prismatic Cell Sealing Machine Prismatic Cell Sealing Machine Prismatic Cell Sealing Machine

Vacuum Steel Ball Sealing Machine For Prismatic Cell Case

This TOB-DGZ-S01 vacuum steel ball sealing machine is suitable for steel shell (aluminum shell) lithium ion prismatic cell case sealing.

  • Brand:

    TOB NEW ENERGY

  • item no.:

    TOB-DGZ-S01

  • order(moq):

    1

  • Payment:

    L/C,T/T

  • product origin:

    China

  • shipping port:

    XIAMEN
inquiry now
Product Detail

Vacuum Steel Ball Sealing Machine For Prismatic Cell Case



SPECIFICATIONS (TOB-DGZ-S01)

Equipment function and principle introduction

This TOB-DGZ-S01 vacuum steel ball sealing machine is suitable for vacuuming and steel ball sealing of steel shell (aluminum shell) lithium ion prismatic cell.


Equipment operation process
The equipment adopts the structure of left and right double chamber, the battery loading and unloading and steel ball beating work at the same time. Put the battery into the fixed fixture → feed the battery into the bead area by the feeding cylinder (the other fixed fixture retreats into the feeding position) → the cylinder is pressed down for sealing → start vacuumizing to reach 85~95kpa → send a steel ball to the front of the ball cylinder → put the steel ball into the ball cylinder → reset each mechanism → charge compressed gas and discharge vacuum → feeding cylinder to send another battery into the sealing area, and exit the sealed battery at the same time.


Process performance

Double position, manual feeding mode; first vacuumize, then hit steel ball; steel ball storage tank has a certain capacity, easy to operate; vacuumizing time and vacuum pressure value can be simply set on the panel; upper and lower cavities have positioning device to ensure the accuracy of steel ball; fixture size and steel ball can adapt to the order model; the main parts of the machine are chrome plated, rust proof and corrosion resistant; The independent control electric box is placed outside the glove box to avoid corrosion; the whole machine is safe, stable, reliable and easy to operate.


Mechanical part


1. Rack mechanism

It has chromium plated platform bottom plate, chrome plated column, etc.


2. Transposition mechanism
It has transposition cylinder, guide slide rail, sliding bottom plate and vacuum chamber. Two vacuum chambers can realize alternate operation of clamping and steel ball.


3. Cavity sealing mechanism

With sealed cover plate (chrome plated), lifted by cylinder, four guide pillars.


4. Rubber feeding stopper mechanism

It has steel ball groove, steel ball pipeline, ball feeding thimble (imported SKD hardening treatment), ball feeding cylinder and sealing cylinder, which are installed on the sealing cover plate.


5. Rubber stopper mechanism

It has chrome plated sealing seat plate, steel ball thimble (imported SKD hardening treatment), steel ball cylinder.


6. Fixture mechanism

The battery clamping plate is positioned in the battery cavity, and is positioned by the battery clamping plate.


Equipment incoming materials and product specifications

1865138, 2265145，2770165

Remarks: according to the different battery dimensions, it is equipped with special positioning base plate, which is convenient for installation.


Configuration power supply

220V / 50Hz, 0.1 kw

Compressed air

≥0.6MPa, 10L / min (provided by users)

Vacuum source

- 0.09mpa, 40L / min (provided by the user)

Equipment weight

about 0.15t

Equipment dimension (L*W*H)

900*430*1000mm

Steel ball


Accuracy of bead deviation

±0.1mm

Vacuum value control

- 85 ~ 90kpa

Vacuum time

1 ~ 999 seconds

Pressure relief control

0.1 ~ 0.6 kPa

Equipment capacity

40-100ea / h

(depending on the proficiency of workers)

Yield

≥98%

Acceptance product specification

Subject to 60ah


PRODUCT DISPLAY


 Email : tob.amy@tobmachine.com

 Skype : amywangbest86

 Whatsapp/Phone number : +86 181 2071 5609

Related Tags :

Vacuum Steel Ball Sealing Machine

Prismatic Cell Sealing Machine

Prismatic Cell Making Machine

Send a Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

our works
related products
Laser Welding System
Laser Welding System for Prismatic Cell Sealing
This TOB-1LP-2000-CWS laser welding system is suitable for the lid welding and filling hole welding of prismatic cells.
Laser Welding Machine
Laser Welding Machine for Prismatic Cell Top Lid and Filling Port Sealing
This TOB-LW-SF3000 prismatic cell top lid and filling port laser welding machine is a core component in prismatic lithium-ion cell assembly, responsible for the final, permanent hermetic sealing of the cell enclosure (lid-to-can) and the electrolyte filling port. It ensures the structural integrity, safety, performance, and lifespan of the finished battery cell.
China Leading 1700 ℃ atmosphere chamber furnaces Manufacturer
1700 ℃ atmosphere chamber furnaces
1700 ℃ atmosphere chamber furnaces SPECIFICATIONS Model TOB-DSP-GF1700-I TOB-DSP-GF1700-II TOB-DSP-GF1700-III TOB-DSP-GF1700-IV TOB-DSP-GF17-V Power 3KW 5KW 7 KW 9KW 13 KW Furnace tube size(mm) 160X150X150 200X200X200 300X200X200 300X250X250 400X300X300 Dimension 550X 470X860 600X 510X910 600X610X940 650X 610X990 700X 710X1355 Power supply voltage 220V 380V Phase number Single-phase Heating element 1800 type silicon molybdenum rod Temperature control mode 一.Yudian temperature control 30 sections can only use PID temperature regulation. 二.FP93 temperature control (from Japan) (Replace imported instruments, for an additional fee) 1,40 section program temperature control can be divided into 4,2,1 group program,  if the program is divided into four groups, each program segment 10, 2,6 group PID control, low, medium and high temperature can each with a set of PID,  such that each segment is capable of controlling the temperature is very accurate. Control accuracy +/- 1 ℃ Triggers 1.Phase trigger (with soft start and current limiting function) 2.Current limiting function: no matter how to adjust the heating time,  our furnace transformer secondary current through the post is limited to 160A,  limited protection of equipment, no matter how you operate, the device will not burn. 3.Soft-start function: When the power current will slowly increase, the impact on the heating element is small, help extend the life of the heating element SCR 106 / 16E Germany Semikron Max temperature 1700 ℃ Rated temperature 1650 ℃ Heating rate ≤20 ℃ / Min (available upon request modification) Recommended heating rate ≤10 ℃ / Min   Thermocouple Type Type B Certification CE Surrounding surface temperature ≤45℃ Maximum temperature use in a variety of atmosphere  Atmosphere Max temperature NO2,CO2,O2,Air 1700℃ He,Ar,Ne 1650℃ SO2 1600℃ CO,N2 1500℃ Wet H2 1400℃ Dry H2 1350℃  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609
Iron Nickel Foam
Iron Nickel Foam For Battery Electrode Material
High quality Iron Nickel Foam For Battery Electrode Materials SPECIFICATIONS Model : TOB-IFeF-003 Material : Iron nickel foam, Sold in sheet. Dimension : 200*300*3mm, or customized as request Thickness : 3mm The aperture : 0.1mm-10mm (5-130ppi) Porosity : 75-98% Through Hole Rate : ≥98% Bulk density : 0.1-0.8g/cm3 Application field Exhaust gas purifier carrier materials,battery electrode materials, all kinds of catalyst carrier, especially for high temperature resistance and acid and alkali corrosion filtering material, the surface of the infrared burner materials, all kinds of industrial and civil heating material drying equipment, etc PACKAGE AND SHIPPING 1 Standard exported package : Internal bottle sealing, outside the aluminum-plastic composite membrane sealing 2 Shipping by express, by air, by sea according to customer's requirements to suggest the most suitable shipping mode SERVICES 1 We supply machines with battery technology support. 2 We can also supply a full set of materials for lithium battery including polymer battery, cylinder battery, mobile phone battery, EV battery. 3 We can also supply a full set of lithium battery equipment for lab research, pilot scale research and production line. 4 We can also supply a full set of battery technology for battery design, research and producing. We cooperated with each other, and we will do TOP OF THE BEST battery  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609
battery short circuit testing machine
Battery short circuit testing machine
Battery short circuit testing machine For Lithium Battery Safety Performance Testing SPECIFICATIONS Type   TOB-BE-1000A Short circuit current   500A 、1000A can be choose DC Response Time   ≤5us Device resistance   ≤5MOhm，can customized Remote distance   7m No solid obstacle Short circuit time   1~9999s or 1M~99H59M can be set Dimension   W650*D730*H970mm Explosion-proof box size   W500*D500*H500mm, thickness:5mm Power supply   AC220V 50HZ Power    1.0KW Weight   About 180Kg  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609
Composite Aluminum Foils
LCP and PET Composite Aluminum Foils
TOB NEW ENERGY provides both PET and LCP composite aluminum foils for battery research and manufacturing. According to your requirements, we can provide both LCP model and PET model composite aluminum foils.
Autoclave
Large Horizontal Autoclave
The TOB-Z450H and TOB-Z650H large horizontal autoclave extracts vacuum and fills steam into the sterilization room for many times to make the sterilization chamber reach a certain vacuum degree, and then fills saturated steam to reach the set pressure and temperature, so as to achieve the purpose of sterilization of the sterilized substance.