-
Recently, Professor Zhang Qiang's team from the Department of Chemical Engineering at Tsinghua University published the research results on the bulk/surface interface structure design of lithium-rich manganese-based cathode materials for all-solid-state metal lithium batteries. They proposed an in-situ bulk/surface interface structure regulation strategy, constructed a fast and stable Li+/e−pathwa...
read more
-
The stability and dispersibility of battery slurry have an important impact on the properties of electrodes and finished battery products. So how to characterize the stability and dispersibility of battery slurry? Characterization method of battery slurry stability 1. Solid content method The solid content test method is a low-cost and easy-to-test method. Its principle is to place the slurry in a...
read more
-
WANG Kunpeng ,1, LIU Zhaolin2, LIN Cunsheng2, WANG Zhiyu ,1,2 1. State Key Lab of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China 2. Branch of New Material Development, Valiant Co., Ltd., Yantai 265503, China Abstract In comparison to Li-ion batteries, Na-ion batteries offer the benefits of low cost, good low-temperature performance, and safety...
read more
-
Lithium iron phosphate (LiFePO4) cathode electrode material oil-based slurry usually uses N-methylpyrrolidone (NMP), dimethyl sulfoxide and dimethylformamide as solvents, which have problems such as difficult solvent recovery, large amount of use and environmental pollution. LiFePO4 positive electrode material water-based slurry uses deionized water as solvent, which is environmentally friendly an...
read more
-
When designing lithium-ion batteries, the choice of battery casing material is critical. It must not only protect the battery's internal electrochemical components and structure but also possess properties like heat resistance, corrosion resistance, vibration resistance, and crush resistance. Among numerous materials, aluminum shells have emerged as the preferred choice due to their unique advanta...
read more
-
Lithium-ion batteries (LIBs) are the powerhouse of modern electronics and electric vehicles (EVs), and their performance hinges on the cathode materials. Among these, ternary cathode materials such as NCM (Nickel-Cobalt-Manganese oxides) and NCA (Nickel-Cobalt-Aluminum oxides) dominate due to their balanced energy density and stability. However, varying the ratios of nickel (Ni), cobalt (Co), mang...
read more
-
The voltage of a lithium battery is closely related to the electrode potentials of its cathode and anode materials. Variations in voltage among lithium batteries using different materials primarily stem from the following factors: Impact of Electrode Materials’ Chemical Properties Lithium batteries operate through the movement of lithium ions between the cathode and anode during charging and disch...
read more
-
In lithium-ion battery manufacturing, the fineness of the slurry (mainly referring to the electrode slurry) is a key parameter affecting electrode performance (such as capacity, rate capability, cycle life, safety) and process stability. Different battery types have significantly different fineness requirements for the slurry (usually measured by particle size distribution indicators such as D50, ...
read more
-
I. Characteristics and Advantages of Polyacrylate (PAA) Binders Minimal Swelling in Electrolyte Solvents: Exhibits low swelling, maintaining structural integrity of electrode sheets during charge/discharge cycles. High Proportion of Carboxyl Groups: The high density of polar carboxyl groups forms strong hydrogen bonds with hydroxyl-containing active materials, enhancing dispersion stability. Conti...
read more
-
Self-discharge in lithium-ion batteries refers to the phenomenon where the battery's charge/voltage naturally decreases when disconnected from an external circuit (i.e., in an open-circuit state). This is an inherent characteristic of all batteries, though the degree varies. Lithium-ion batteries exhibit a relatively low self-discharge rate but are still affected. The primary causes can be categor...
read more
-
Ⅰ. Performance Advantages and Challenges of Silicon-Carbon Anode Materials (1) Electrochemical Characteristics of Silicon In lithium-ion battery anode research, silicon attracts significant attention due to its extremely high theoretical specific capacity. Upon full lithiation, silicon can form alloys with a specific capacity reaching 4200 mAh/g, nearly ten times that of conventional graphite. Thi...
read more
-
As the global battery industry seeks alternatives to lithium-based chemistries, sodium-ion batteries have steadily moved from academic research into early-stage commercialization. Among various cathode candidates, NFPP (Na₃Fe₂(PO₄)₃) has gained increasing attention due to its balanced performance, structural stability, and supply-chain advantages. Rather than pursuing extreme energy density, NFPP ...
read more
Chinese
français
Deutsch
italiano
español
português
Nederlands
日本語
한국의
subscribe to us 
