-
The battery slurry is a highly viscous solid-liquid two-phase suspension system, and to assess the stability of this system, the first step is to study its composition and its functional properties. Most of the lithium industry uses oil-based slurry, which is a mixture formed by mixing and dispersing active materials, binders, conductive agents, solvents, etc. in a certain ratio and order. Cathode...
read more
-
The Preparation Method of Battery Cathode Slurry Wet Electrode Preparation Process A double planetary mixer was used as the cathode electrode slurry preparation equipment. First, prepare polyvinylidene fluoride (PVDF) glue. Use an ordinary mixing tank to pour a certain amount of solvent NMP (N-methylpyrrolidone) first, add the binder PVDF powder according to the designed solid content, and stir fo...
read more
-
Sb Doped O3 Type Na0.9Ni0.5Mn0.3Ti0.2O2 Cathode Material for Na-ion Battery KONG Guoqiang, LENG Mingzhe, ZHOU Zhanrong, XIA Chi, SHEN Xiaofang. Sb Doped O3 Type Na0.9Ni0.5Mn0.3Ti0.2O2 Cathode Material for Na-ion Battery[J]. Journal of Inorganic Materials, 2023, 38(6): 656-662. Abstract Cycle stability and specific capacity of cathode materials for sodium ion batteries play an important role in ach...
read more
-
Electrochemical Activity of Positive Electrode Material of P2-Nax[Mg0.33Mn0.67]O2 Sodium Ion Battery Author: ZHANG Xiaojun1, LI Jiale1,2, QIU Wujie2,3, YANG Miaosen1, LIU Jianjun2,3,4 1. Jilin Province Sci-Tech Center for Clean Conversion and High-valued Utilization of Biomass, Northeast Electric Power University, Jilin 132012, China 2. State Key Laboratory of High Performance Ceramics and Superfi...
read more
-
LaNi0.6Fe0.4O3 Cathode Contact Material: Electrical Conducting Properties Manipulation and Its Effect on SOFC Electrochemical Performance ZHANG Kun, WANG Yu, ZHU Tenglong, SUN Kaihua, HAN Minfang, ZHONG Qin. LaNi0.6Fe0.4O3 Cathode Contact Material: Electrical Conducting Properties Manipulation and Its Effect on SOFC Electrochemical Performance[J]. Journal of Inorganic Materials, DOI: 10.15541/jim2...
read more
-
1. What is lithium iron manganese phosphate? Lithium iron manganese phosphate is a new cathode material formed by doping lithium iron phosphate with a certain amount of manganese element. Since the ionic radii and some chemical properties of manganese and iron elements are similar, lithium iron manganese phosphate and lithium iron phosphate are similar in structure, and both have an olivine struct...
read more
-
Recently, Professor Zhang Qiang's team from the Department of Chemical Engineering at Tsinghua University published the research results on the bulk/surface interface structure design of lithium-rich manganese-based cathode materials for all-solid-state metal lithium batteries. They proposed an in-situ bulk/surface interface structure regulation strategy, constructed a fast and stable Li+/e−pathwa...
read more
-
WANG Kunpeng ,1, LIU Zhaolin2, LIN Cunsheng2, WANG Zhiyu ,1,2 1. State Key Lab of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China 2. Branch of New Material Development, Valiant Co., Ltd., Yantai 265503, China Abstract In comparison to Li-ion batteries, Na-ion batteries offer the benefits of low cost, good low-temperature performance, and safety...
read more
-
Lithium iron phosphate (LiFePO4) cathode electrode material oil-based slurry usually uses N-methylpyrrolidone (NMP), dimethyl sulfoxide and dimethylformamide as solvents, which have problems such as difficult solvent recovery, large amount of use and environmental pollution. LiFePO4 positive electrode material water-based slurry uses deionized water as solvent, which is environmentally friendly an...
read more
-
Lithium-ion batteries (LIBs) are the powerhouse of modern electronics and electric vehicles (EVs), and their performance hinges on the cathode materials. Among these, ternary cathode materials such as NCM (Nickel-Cobalt-Manganese oxides) and NCA (Nickel-Cobalt-Aluminum oxides) dominate due to their balanced energy density and stability. However, varying the ratios of nickel (Ni), cobalt (Co), mang...
read more
-
As the global battery industry seeks alternatives to lithium-based chemistries, sodium-ion batteries have steadily moved from academic research into early-stage commercialization. Among various cathode candidates, NFPP (Na₃Fe₂(PO₄)₃) has gained increasing attention due to its balanced performance, structural stability, and supply-chain advantages. Rather than pursuing extreme energy density, NFPP ...
read more
Chinese
français
Deutsch
italiano
español
português
Nederlands
日本語
한국의
subscribe to us 
