electrode

The lithium battery coating machine TOB-132MS-500-6M model coating machine is a single face continuous and Intermittent  coating machine mainly used for Slurry drying process of lithium battery electrode coating. The battery coating machine adopts continuous and Intermittent coating mode, is mainly used for lithium battery pilot scale production line

500mm Width Battery Electrode Shear Cutting Machine 

This Battery stacking machine is a full-automatic stacking machine. It is an ideal tool for stacking multiple layers of positive & negative electrode and separator for pouch cell.

Automatic Die Cutting / Punching Machine For Anode and Cathode Electrode for Stacking Pouch Cell SPECIFICATIONS This machine is used for make the roll electrode into cell shape electrode automatically. 1 Roll electrode feeding automatically, controlled by Photoelectric switch 2 Adopt laser module to get high efficiency and accuracy Model TOB-04-350-DC Source voltage  AC 220V, 50HZ Power  4.2KW Air compression 0.6-07MPa Suitable battery size ≤350*200mm Max electrode width 360mm Cutter die height 23.8mm Accuracy of struggle 0.1mm Capacity 40-60times/min Dimension 2800*1400*900mm Weight 2500kg Finished electrode of the die cutter machine  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

3600W Ultrasonic metal welding machine

Automatic high-precision electrode forming machine SPECIFICATIONS TOB-LPC520 series machine technical parameters: Forming speed 20-30 punching  per minute. Maximum electrode width 520mm (actual maximum 540mm) The largest size electrode forming 500mm*500mm Electrode thickness 0.06 ~ 0.25mm Cutter life about 30,000 times Forming burr ≤0.015mm After punching the edges dusting ≤0.15 mm PET conveyor belt life recycling approximately 10,000~30,000 times Electrode box size according to customer-supplied Failure rate of the device ≤5% (only caused by the equipment failure) Power  required 6.0KW Voltage AC380V ± 10% Air pressure required 0.5 ~ 0.7Mpa Vacuum required -90Kpa ~ -60Kpa Weigh 4000KG Dimension (approx) length: 4300MM * Width: 2000MM  * High: 1850MM Other: According to electrode specifications provided by the customer, provide a laser sheet die cutter free.  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

Two sides of test cellconnect to both electrode (the anode and cathode), with the middle being connected to the reference electrode which can be used for monitoring voltage variations of the two electrodes.

TOB-3ESTC15P Three-Electrode Split Test Cell with Pressure Gauge is used for R&D Battery - 15 mm Diameter Cell , to reference electrode between the anode and the cathode.

The TOB-DSP-S battery electrode comma blade coating machine is a high-precision, high-efficiency coating equipment designed for new energy fields such as lithium batteries and supercapacitors.

Carbon-coated aluminum foil for lithium ion battery electrode material.

Thermally conductive coating copper foil for battery electrode material.

TOB-ZBQ Multi-groove coating device is designed for use on a flat substrate coating uniformity paint, adhesives and similar products.Our company put more grooves precision coating device diversity and alternative fixed groove coating device is incorporated in a meter.

TOB-PPM-R Manual Powder Press Machine  is used for cosmetic ,medicine powder, chemical powder sheet preparation. It is an ideal equipment for the laboratory to do scientific research in enterprises, colleges and universities.

Suitable for battery core lamination process, the positive and negative electrodes and a separator stacked together.When manually laminated positive and negative film to be placed on the stack pod,separator automatic unwinding,correction, precision rodless cylinder transverse movement around the separator,2 sets of loop pressure needle pressed around the pole piece, insulating film, laminate floors can be freely set. plc HMI system to achieve human-computer dialogue, easy to operate.

1. For square and cylindrical battery cells winding molding; 2. Winding core speed can be adjusted, reversing foot switch control, easy to operate; 3. High-precision bearing, improve the precision winding batteries; 4.The operating table is stainless steel, beautiful appearance, overall appearance. 5 .Machine is small, the operation is simple and easy to adjust.

Heat Roller Press Machine For Battery Electrode Material

Cold press automatic detection system

TOB-MQ100-H manual electrode die cutter machine adopt Hydraulic cutter method and it is mainly used for pouch cell electrode sheet cut for stacking pouch cell battery.

1.The inhibition of cell polarization, reduce the heating effect and improve the rate performance; 2.Reduce the battery internal resistance, and decrease the circulation process of dynamic resistance increase; 3.Improve the consistency, increase the battery cycle life; 4.Improve the adhesion of and active materials, reduce the pole piece manufacturing cost; 5.Protect collection of fluid from the electrolyte corrosion; 6.Improve lithium iron phosphate, lithium titanate materials processing performance.

carbon coated aluminum foil: Using functional coatings for surface treatment of battery conductive substrate is a breakthrough of technical innovation, coated carbon foil/copper foil is to spread good nano conductive graphite and carbon coated particles, fine and uniform coating on aluminum foil/copper foil.Static electrical conductivity, it can provide an excellent collection of active material micro electric current, which can greatly reduce the positive/negative material and collector, the contact resistance between the and can improve the adhesive ability between the two, can reduce the use amount of binder, which creates an significantly improve the overall performance of the battery.Can be divided into water based coating (water system) and oil (organic solvent system) two types.