Pneumatic Point Welding Machine

This pneumatic spot welding machine is mainly used for 18650 cylinder cell pack welding, it can weld Nickel tab thickness from 0.02-0.2mm with good welding effect. For single point, used for Ni tab weld with steel case.

The bottle and tube roller mixer is to mix the sample by rolling the roller and the sample container (such as bottle, test tube, etc.) at the same time.

Small Battery Dropping Test Machine For Lithium Battery Safety Performance Testing SPECIFICATIONS Type  TOB-BE-F-315S TOB-BE-F-320S Drop height 300~1500mm Adjustable 300~2000mm Adjustable Dimension W700*D900*H1760mm W700*D900*H2260mm Weight About 90kg About 110kg Max battery weight    2kg±100g Max battery size    L150*W200 Drop height Ruler Material    Stainless steel ruler，Min scale:1mm Drop plate material    Steel plate(Hard wood/Marble slab/Acrylic sheet/Cement board optional) Dropping way    Pneumatic Drop Up and down way    Electric lift Power supply    AC220V 50HZ Power     0.5KW Air pressure    <2MPa  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

This is a bottom welding and grooving two-in-one machine, the two machines also can be used separately.

Automatic Electrolyte Battery Filling Using Conveyor System For Polymer Battery Filling System SPECIFICATIONS This Automatic Battery Filling System is automatic polymer battery filling machine, it includes Bar code scanning, weigh before filling, automatic injection electrolyte, automatic vacuum holding, automatic vacuum sealing, weigh after filling, automatic discharging, etc. Automatic battery filling system work process Model Automatic Battery Filling System TOB-AFMY-200 Source voltage AC220V, Single phase. Customized according country request Power 10KW Warranty  One year limited warranty with lifetime support Compressed air 0.6MPa  Output 6ppm, according to vacuum holding and sealing time Vacuum flow 350M3/hour Suitable battery size Length 130-285mm, Width 100-170mm, Thickness 8-11mm  Structure configuration  Trough body 3SET Battery rotating mechanism 1SET Automatic feeding mechanism 1SET Weight before filling 1SET Into the jig transfer institution 1SET Pour institutions without electric pump 1SET Vacuum holding box 3SET Vacuum pre-sealing 1SET Discharge transfer institution 1SET Weight after filling 1SET Automatic discharging device 1SET Automatic receiving institutions 2SET With PLC, Touch screen,    Driving motor 2SET Project control system 1SET CAM drive motor 2SET Vacuum holding box 1-99s can be set, with -95kpa vacuum degree Vacuum pre-sealing machine Sealing stamp width : 8mm Sealing head length : 300mm Sealing TEM : Max 260℃, adjustable Sealing Head parallelism : ±0.02mm Vacuum degree : -90KPa Dimension (L*W*H) 8000*1500*2400mm Weight 4000kg  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

TOB-MFA-200 manual case insertion machine for prismatic cells: 3-5ppm, T30-60/W50-180/H100-200mm, pass rate ≥99.95%. Polyurethane rollers, suction case opening, touchscreen travel setting. Get specs and support.

Lithium chips and lithium plate use for coin cell battery materials, purity: 99.99%

Can be used for electrode, copper foil, aluminum foil and battery separator punching to disc pieces.