Semi Auto Bottom Welding and Grooving Two-in-one Machine

Semi Auto Bottom Welding and Grooving Two-in-one Machine For Cylindrical Cell 

SPECIFICATIONS

This is a bottom welding and grooving two-in-one machine, the two machines also can be used separately. It is a connected device designed for customers to weld the bottom of the cylindrical battery and the grooving at the mouth of the steel cans. 

It is suitable for 18650, 21700, 26650, 32650 cylindrical cell with different dies. 

Bottom Welding Part

(1) When the battery is fed, the feeding cylinder pushes the battery to the spot welding position, and the discharge cylinder discharges the material after the spot welding is completed.

(2) When the battery reaches the needle removal position, the needle pulling cylinder will automatically pull out the spot welding needle and put it into the needle receiving box.

Grooving Part

(1) The battery after finished bottom welding enters the grooving assembly line.

(2) When the equipment senses that there is material at the feeding pusher plate, the pusher cylinder will send the battery to grooving part.

(3) The upper head presses down, and then the main motor rotates to drive the battery to rotate. At this time, the hob moves forward with the ejector roller at the same time, and then the head cylinder presses down to complete the grooving. The battery is discharged directly.

 Skype : amywangbest86

 Whatsapp/Phone number : +86 181 2071 5609