Benchtop Stainless Steel Vacuum Glove Box

This product is widely used in biochemistry, metallurgy, electronics, chemical, geological, mineral,pharmaceutical and other sectors. Electronic materials, magnetic materials, equipment, batteries biological cultivation, food vacuum packaging, battery materials and so on.

VGB-3 Benchtop Stainless Steel Vacuum Glove Box

Vacuum glove box (also known as vacuum inert gas operation box) can effectively solve the easy oxidation and deliquescence problems, the device can make test sample safely put in and taken out, and operation, reaction and test in anaerobic anhydrous conditions freely, to ensure the normal scientific experiments.

This TOB-STX-2 stainless steel glove box is an inert atmosphere glove box for lithium battery research and manufacturing.

Open Double Layer Constant Temperature Electrolysis Cell TOB-CC500

Surface Area and Pore Size Analyzer For Powder Material Research SPECIFICATIONS Power Voltage: 100V~220V ± 10V  Frequency: 50/60Hz Maximum power: 300W Connection: grounding, single-phase power socket Physical properties Length: 60cm (23.6 inches) Width: 48cm (18.9 inches)   Height: 74cm (29.1 inches) Weight: 60kg (132.3 lbs) Accessories Weight: 30kg (66.1 lbs )  Installation requirements (L * W) 100 * 60cm (not including space computers taking up) Functions  ● Surface area measurement: BET surface area (Single-point and multi-point), Langmuir surface area, T-plot method outer surface area,  T-plot method the total inner surface area of microporous, BJH adsorption cumulative surface area of the total pore, BJH desorption cumulative surface area of the total pore ● Determination of pore volume: Single point total pore volume,BJH adsorption cumulative total pore volume    BJH desorption cumulative total pore volume    T-plot method the total pore volume of micropore ● Determination of average pore size:    Adsorption average pore diameter   BJH adsorption average pore diameter   BJH desorption average pore diameter   The most frequency pore ● Pore size distribution:   BJH adsorption and desorption differential pore size distribution (dV / Dr-D) and (dV / dlogD-D)   BJH adsorption and desorption integral distribution (or cumulative distribution)   MP method micropore distribution Technical Parameters Test principle: the static volumetric method, gas adsorption; Analysis Models: BET, Langmuir, BJH, t-plot, DR, MP and NLDFT; Measuring range: surface area ≥ 0.005M2/g, no upper limit; pore size 2 _ 500nm; pore volume 0.0001cc/g, no upper limit; Sorption gas: N2 (high purity); Ar, Kr, CO2, etc. available Analysis No: Two independent analysis ports  Degassing stations: Two Sample Type: powders, granules, fibers, flakes and other materials  Sensor：Two sensors, 0_1000 torr P.S (0_133kpa);  Test Efficiency: multi-point BET surface area _12 minutes per sample; Determination pore size distribution from adsorption isotherms _1.5h per sample;  Determination pore size distribution from adsorption and desorption isotherms _3.5 h per sample. Nitrogen Partial Pressure: P/Po 4×10-5 _ 0.998, the minimum resolvable relative pressure  5 × 10-5 Ultimate vacuum: 4.0 × 10-2Pa（3×10-4  torr） Pressure Accuracy: ≤ ± 0.15% (F.S) Repeatability accuracy: surface area ≤ ±1.0 % （surface area）;  ≤2nm (pore size) Operation Mode: Automatic  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

This TOB-CF650-3 manual sealing machine is suitable for cylindrical Cell cans third sealing. Standard 18650 cylindrical battery sealing die (third sealing) (other cylindrical battery sealing dies are optional).

It is a special tablet pressing machine for powder such as medicine powder, chemical preparation and so on. It is an ideal equipment for the laboratory to do scientific research in enterprises, colleges and universities.