Coating Defects

The Electrode Coating Machine is the key equipment for the production of lithium battery electrode. Because it directly affects the subsequent rolling operation, and even affects the performance of the entire battery. At present, the mainly lithium battery electrode coating process is: scraper type, roll to roll transfer coating type and a slit extrusion type. General speaking, laboratory equipmen...

When preparing the electrode of lithium ion battery, aluminum foil is used as the cathode current collector foil, while copper foil is used as the anode current collector foil. If a single smooth foil is used, it is recommended to apply the foil on the rough side to increase the bonding force between the current collector foil and the materials. There is no special requirement for the thickness of...

Battery Electrode Transfer Roll Coating Machine Coating roller rotation drive slurry, through adjusting the scraper clearance to adjust the amount of slurry transfer, the slurry is transferred to the substrate(copper foil,aluminum foil, etc.) by the rotation of the coating roller, and according to the process requirements, control the coating thickness to meet the weight requirements. At the same ...

The cathode electrode coating is the cathode slurry extrusion coating or spraying on the cathode current collector aluminum foil, the density of one side is 20 to 40 mg/cm2. Coating oven temperature conventional 4-8 sections (or more), each section of baking temperature 95℃ ~ 120℃ according to the actual needs to adjust, to avoid baking cracking transverse cracks and solvent phenomenon, the speed ...

Lithium battery production process mainly includes battery cathode and anode slurry mixing, positive and negative electrode coating, roller pressing, electrode cutting, battery electrode making and die cutting, respectively corresponding to mixer, coating machine, roller press, slitting machine, electrode notching machine and electrode die cutting machine. The previous process of lithium battery -...

Battery electrode coating is a critical process in the manufacturing of batteries, as it affects the performance, efficiency, and quality of the final product. Electrode coating involves the application of a slurry onto a substrate, such as a metal foil or a current collector, to create a uniform and thin layer of active material, such as lithium cobalt oxide, graphite, or silicon, that can store ...

Lithium-ion batteries are widely used in various fields due to their high energy density, long cycle life and environmental friendliness. The anode electrode slurry is one of the key components of lithium-ion batteries, which affects the performance and safety of the batteries. Therefore, it is important to understand the preparation process and precautions of the anode electrode slurry. The prepa...

As a key equipment in battery production, the calibration accuracy of the coating head of the lithium battery coating machine directly affects the coating quality, and thus affects the performance and life of the battery. This article will analyze the calibration method of the lithium battery coating machine die head in detail from three levels: basic calibration, positioning calibration, and fine...

In lithium battery manufacturing, the often-overlooked A/B-side coating misalignment issue during the coating process significantly affects battery capacity, safety, and cycle life. Misalignment refers to inconsistencies in the positional alignment or thickness distribution of coatings on the front and back sides of electrodes, which can lead to risks such as localized lithium plating and mechanic...

Defects in lithium-ion battery coating originate from three main parts: the coating slurry, the coating window, and the coating drying process. In the slurry preparation process, incomplete dispersion introduces agglomerated particles; insufficient iron removal filtration introduces metal debris; and incomplete vacuum deaeration leaves behind numerous bubbles. Corresponding coating defects include...