welcome to XIAMEN TOB NEW ENERGY TECHNOLOGY Co., LTD..
  • English
  • Russian
  • f
  • i
  • y
  • t
  • p
battery machine and materials solution
Products

Hot Products


Centrifugal Machine
加载中...

Laboratory Centrifuge Centrifugal Machine

This TOB-TG16G centrifuge is a device that uses centrifugal force to separate various components of a fluid.
  • Brand:

    TOB NEW ENERGY
  • item no.:

    TOB-TG16G
  • order(moq):

    1set
  • Payment:

    L/C,T/T
  • product origin:

    China
  • shipping port:

    XIAMEN
Product Detail

Laboratory Centrifuge High Speed Centrifugal Machine



SPECIFICATIONS


Acentrifugeis a device that uses centrifugal force to separate various components of a fluid. This is achieved by spinning the fluid at high speed within a container, thereby separating fluids of different densities or liquids from solids. It works by causing denser substances and particles to move outward in the radial direction. At the same time, objects that are less dense are displaced and moved to the centre. In a laboratory centrifuge that uses sample tubes, the radial acceleration causes denser particles to settle to the bottom of the tube, while low-density substances rise to the top. A centrifuge can be a very effective filter that separates contaminants from the main body of fluid.


Model

TOB-TG16G

Max speed

16600rpm

Max relative centrifugal force

19200×g

Warranty

One year limited warranty with lifetime support

Max capacity

400ml

Speed precision

±50r/min

Time setting

0-99min

Structure

1Microcomputer control, touch panel, intuitive figures, operation parameters can be automatically memory, convenient operation

2 Multilayer damping structure, small vibration, low noise, environmental protection

3 Large torque brushless motor drive, smooth operation, free maintenance

Source voltage

AC220V 50HZ, 15A

Noise

≤60dB

Dimension(H*L*W)

400*350*340mm

Net weight

About 25kg

Configuration

 12*10ml Angle rotor : one set

6×50ml Angle rotor : one set


Angle rotor spec:

Model

NO.

Capacity

Max speed

Max relative

centrifugal force

Angle Rotor

No.1

12×1.5ml

16600 r/min

19200×g

No.2

18×0.5ml

16600 r/min

19200×g

No.3

24×1.5ml/2.0ml

13000 r/min

16060×g

No.4

48×0.5ml

13000 r/min

14740×g

No.5

12×5ml

13000 r/min

11500×g

No.6

12×15ml

12000 r/min

14800×g

No.7

4×100ml

11000 r/min

14610×g

No.8

6×30/50ml

11000 r/min

14610×g

No.9

12×10ml

12000 r/min

14800×g

No.10

12×20ml

10000 r/min

10290×g

Horizontal rotor

No.11

2×2×48

3000 r/min

1400×g


PRODUCT DISPLAY


Laboratory Centrifuge

Laboratory Centrifuge


More information about laboratory devices for lithium-ion battery research.



 Email : tob.amy@tobmachine.com

 Skype :amywangbest86

 Whatsapp/Phone number :+86 181 2071 5609

Send a Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

our works
related products
 high speed centrifuge
High Speed Centrifuge
Centrifuge (Centrifuge) is a common tool in the lab, mainly used for solid phase and liquid phase separation of colloidal solution.
Planetary Vacuum Centrifugal Mixer
Planetary Vacuum Centrifuge Mixer
Adopting planetary vacuum mixing and de-bubbling, it is suitable for mixing all kinds of liquid or powder materials. Such as battery powder or slurry, carbon nanotubes, nanopowder, conductive ceramics, oxide powder and metal powder, etc., to ensure that the samples are mixed in a vacuum state to achieve better experimental results.
China Leading Surface Area and Pore Size Analyzer Manufacturer
Surface Area and Pore Size Analyzer
Surface Area and Pore Size Analyzer For Powder Material Research SPECIFICATIONS Power Voltage: 100V~220V ± 10V  Frequency: 50/60Hz Maximum power: 300W Connection: grounding, single-phase power socket Physical properties Length: 60cm (23.6 inches) Width: 48cm (18.9 inches)   Height: 74cm (29.1 inches) Weight: 60kg (132.3 lbs) Accessories Weight: 30kg (66.1 lbs )  Installation requirements (L * W) 100 * 60cm (not including space computers taking up) Functions  ● Surface area measurement: BET surface area (Single-point and multi-point), Langmuir surface area, T-plot method outer surface area,  T-plot method the total inner surface area of microporous, BJH adsorption cumulative surface area of the total pore, BJH desorption cumulative surface area of the total pore ● Determination of pore volume: Single point total pore volume,BJH adsorption cumulative total pore volume    BJH desorption cumulative total pore volume    T-plot method the total pore volume of micropore ● Determination of average pore size:    Adsorption average pore diameter   BJH adsorption average pore diameter   BJH desorption average pore diameter   The most frequency pore ● Pore size distribution:   BJH adsorption and desorption differential pore size distribution (dV / Dr-D) and (dV / dlogD-D)   BJH adsorption and desorption integral distribution (or cumulative distribution)   MP method micropore distribution Technical Parameters Test principle: the static volumetric method, gas adsorption; Analysis Models: BET, Langmuir, BJH, t-plot, DR, MP and NLDFT; Measuring range: surface area ≥ 0.005M2/g, no upper limit; pore size 2 _ 500nm; pore volume 0.0001cc/g, no upper limit; Sorption gas: N2 (high purity); Ar, Kr, CO2, etc. available Analysis No: Two independent analysis ports  Degassing stations: Two Sample Type: powders, granules, fibers, flakes and other materials  Sensor:Two sensors, 0_1000 torr P.S (0_133kpa);  Test Efficiency: multi-point BET surface area _12 minutes per sample; Determination pore size distribution from adsorption isotherms _1.5h per sample;  Determination pore size distribution from adsorption and desorption isotherms _3.5 h per sample. Nitrogen Partial Pressure: P/Po 4×10-5 _ 0.998, the minimum resolvable relative pressure  5 × 10-5 Ultimate vacuum: 4.0 × 10-2Pa(3×10-4  torr) Pressure Accuracy: ≤ ± 0.15% (F.S) Repeatability accuracy: surface area ≤ ±1.0 % (surface area);  ≤2nm (pore size) Operation Mode: Automatic  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609
lithium chip
Lithium chips for button cell materials D:16mm*T:0.6mm
Used in lithium ion battery, reactor carrier andorganic synthetic vitamins, synthetic rubber, medicine, pharmacy,lial-ce alloy materials etc.
Comma Blade Battery Coating Machine
Lab Comma Blade Battery Coating Machine
The TOB-DSP-S battery electrode comma blade coating machine is a high-precision, high-efficiency coating equipment designed for new energy fields such as lithium batteries and supercapacitors.
Zinc Foil
Zinc Foil Thickness 0.01mm 0.02 0.1 Can be Customized
TOB NEW ENERGY also provide copper foil, aluminum foil, stainless steel foil, nickel foil. If you have any needs, please contact me.
Tube Furnace
Three Heating Zones Tube Furnace
This TOB-G1100-250-III three heating zones tube furnace takes the resistance wire as the heating element, adopts the double-layer shell structure and 30 section program temperature control system, phase-shifting trigger and thyristor control. The furnace adopts fully imported high-purity alumina fiber, vacuum formed fiber and light plate material. Double furnace structure is adopted. The furnace has the advantages of balanced temperature field, low surface temperature, fast temperature rise and fall rate, energy saving and so on.
China Leading Lipf6 Electrolyte solution for lithium battery Manufacturer
Lipf6 Electrolyte solution for lithium battery
Electrolyte Salt: 1 mol/L LiPF6 Organic  Solvent: EC+DMC+DEC; 1:1:1 in volume

leave a message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

Company

top