Manual Coin Cell Disc Punching Cutter

Small Manual Die Cutting Punching Machine For Coin Cell Electrode and Separator Cutting.

TOB-CPJ-01 Coin Cell Disc Punching Machine  is a newly designed button battery electrode cutting machine with lighter weight.

The Coin Cell Punching Machineis used for coin cell electrode punching with customized cutting die.

Can be used for electrode, copper foil, aluminum foil and battery separator punching to disc pieces.

Single-walled carbon nanotubes SPECIFICATIONS Packing: 1g/bottle  Single-walled carbon nano tube (single layer carbon nano tube)  Purity  ≥99.7%  Diameter  0.75~3nm  Length  1~50um  Tensile Strength  800Gpa  Characteristic  Conductive, thermal conductivity, enhance toughness      Multi-walled carbon nano tubes  (multi layer carbon nano tubes)   Purity   ≥99.7%   Diameter   2~30nm   Length   0.1~50um   Tensile Strength   50~200Gpa   Number of layers   2~50   Interlayer spacing   0.34±0.01nm   Characteristic   Conductive, thermal conductivity, enhance toughness  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

1200℃ Mini tube furnace SPECIFICATIONS The tube furnace appearance is small, high quality resistance wire heating element, Using double-shell structure and 30 program temperature control instrumentation, Zero trigger, SCR control, furnace polycrystalline alumina fiber material, stainless steel flanges tube ends can be sealed, Installation on a stainless steel flange has a gas nozzle, valve and pressure gauge,  the vacuum can reach to 10-3 Pa,Balanced with the temperature field, the surface temperature is low,  lifting the temperature and rate, energy saving,Colleges and universities, research institutes,  industrial and mining enterprises to do high-temperature sintering atmosphere, reducing atmosphere,  CVD experiment, vacuum annealing with the ideal product. Model TOB-DSP-1200℃-S-I TOB-DSP-1200℃-S-II Power 1.5 KW 1.5 KW Furnace tube size(mm) Dia 25(OD) X700 /600mm Dia50(OD)X700/600mm Dimension 340X290X415 340X290X415 Power supply voltage 220V Phase number Single-phase Heating element High-resistance wire Control mode 1,30 sections of the program can only PID temperature regulation. 2,over-temperature protection, over-temperature protection  burnout or burnout furnace heating circuit automatically cut off ,  (when the furnace temperature exceeds 1200 degrees or thermocouple burns out,  the AC relay on the main circuit will automatically disconnect the main circuit off,  the panel lights off oN, OFF lights, limited protection EAF). 3, with 485 communication interface (when an optional software standard) 4, with power protection function, namely, electrical power and then to start the stove,  the program does not start from a starting temperature rise,  but began to rise from the furnace power outage. 5, the instrument with a temperature self-tuning features Temperature control mode Intelligent PID Control accuracy +/- 1 ℃ Trigger Zero trigger SCR 106 / 16E Germany Simon Kang Max temperature 1200 ℃ Rated temperature 1100 ℃ Heating rate ≤30 ℃/ Min (Available upon request modification) Heating length 205mm Recommended heating rate ≤15  ℃/ Min Vacuum degree (Optional) 1.General vacuum and drive gas out by:TW-1.5A 2.2XZ-2 Vacuum degree pumps can be able to get around 10Pa 3.TOB-DSP-VS 0.1vacuum system can pumped 0.1Pa  (and equipped with a resistive vacuum gauge display) Certification CE Surrounding surface temperature ≤45℃  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

This TOB-X800W wleder is a 800W ultrasonic welding machine for battery tab welding. It can be used in glove box. For welding pure aluminum strip 0.10mm + pure aluminum foil 0.012-0.018mm (within 20 layers). For welding pure nickel strip 0.10mm + copper foil 0.012-0.018mm (within 20 layers).

This cylindrical mandrel bend tester is suitable for testing the flexibility of the lithium ion battery electrode.