Rotary Vibrating Screen For Battery Slurry

TOB-ZD-100 ultrasonic vibrating screen is a laboratory vibrating sieve used for Different size material screening. It is with ultrasonic power, large amplitude of ultrasonic transducer and vibrating ring.

This kind mesh screen used for lithium battery lab research mainly used for battery material slurry screening after mixing before coating, in order to remove big Larger particles impurities, so that we can get the best slurry for electrode coating.

This is a 600 mesh screen made of 304 stainless steel.

The TOB-ZS-200 Electric vibrating sieve can generally be used for soil analysis, abrasive hemp material, powder metallurgy, coal power, mineral granulation, light industrial ceramics, yellow sand cement, construction chemical industry, marine scientific research, ore grinding, college experiments, metallic ore dressing, coal oil field, gravity magnetic separation, sample detection and so on.

TOB-RJ6901A is an insulation resistance type battery cell short circuit tester, the output voltage 25V~1000VDC is continuously adjustable.

This fully automatic cylindrical sodium ion battery sealing machine is used to realize the automatic sealing of cylindrical batteries after electrolyte filling.

Surface Area and Pore Size Analyzer For Powder Material Research SPECIFICATIONS Power Voltage: 100V~220V ± 10V  Frequency: 50/60Hz Maximum power: 300W Connection: grounding, single-phase power socket Physical properties Length: 60cm (23.6 inches) Width: 48cm (18.9 inches)   Height: 74cm (29.1 inches) Weight: 60kg (132.3 lbs) Accessories Weight: 30kg (66.1 lbs )  Installation requirements (L * W) 100 * 60cm (not including space computers taking up) Functions  ● Surface area measurement: BET surface area (Single-point and multi-point), Langmuir surface area, T-plot method outer surface area,  T-plot method the total inner surface area of microporous, BJH adsorption cumulative surface area of the total pore, BJH desorption cumulative surface area of the total pore ● Determination of pore volume: Single point total pore volume,BJH adsorption cumulative total pore volume    BJH desorption cumulative total pore volume    T-plot method the total pore volume of micropore ● Determination of average pore size:    Adsorption average pore diameter   BJH adsorption average pore diameter   BJH desorption average pore diameter   The most frequency pore ● Pore size distribution:   BJH adsorption and desorption differential pore size distribution (dV / Dr-D) and (dV / dlogD-D)   BJH adsorption and desorption integral distribution (or cumulative distribution)   MP method micropore distribution Technical Parameters Test principle: the static volumetric method, gas adsorption; Analysis Models: BET, Langmuir, BJH, t-plot, DR, MP and NLDFT; Measuring range: surface area ≥ 0.005M2/g, no upper limit; pore size 2 _ 500nm; pore volume 0.0001cc/g, no upper limit; Sorption gas: N2 (high purity); Ar, Kr, CO2, etc. available Analysis No: Two independent analysis ports  Degassing stations: Two Sample Type: powders, granules, fibers, flakes and other materials  Sensor：Two sensors, 0_1000 torr P.S (0_133kpa);  Test Efficiency: multi-point BET surface area _12 minutes per sample; Determination pore size distribution from adsorption isotherms _1.5h per sample;  Determination pore size distribution from adsorption and desorption isotherms _3.5 h per sample. Nitrogen Partial Pressure: P/Po 4×10-5 _ 0.998, the minimum resolvable relative pressure  5 × 10-5 Ultimate vacuum: 4.0 × 10-2Pa（3×10-4  torr） Pressure Accuracy: ≤ ± 0.15% (F.S) Repeatability accuracy: surface area ≤ ±1.0 % （surface area）;  ≤2nm (pore size) Operation Mode: Automatic  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

AL-NI CR strip for Lithium battery tab.