Sodium Ion Battery Electrolyte Filling Machine

SPECIFICATIONS

The battery electrolyte filling machine is used for the electrolyte injection process of sodium ion battery. Adopt vacuum first, electrolyte injection later and then add pressure, the electrolyte absorption is high consistent, reliable and complete.

The working process is as follows: after the capacitor is loaded into the bracket and positioned, it automatically rises and aligns with the injector nozzle to inject liquid after pumping high vacuum. The number of pumping low vacuum and pressurizing cycles can be set freely until the injection is completed.

Technical parameter:

- Suitable for 35-80mm diameter; height 50-204mm can be custom. But one filling die is only suitable for one size, different model need different dies.

- Injection accuracy: ± 1%.

- Injection volume: 0 - 250ml adjustable (one time filling volume suggest not over 200ml. If over 200ml suggest to do filling two times,can set the step program)

- Vacuum: the vacuum pressure should be kept above -98kPa during filling (vacuum provide by buyer).

- Vacuum time, low vacuum degree, filling and standing time, pressure and time can be set and adjusted.

- The joint of the filling tank is made of stainless steel, the hose is made of corrosion-resistant PE hose, the body is made of 6 series aluminum alloy, and the whole machine is corrosion-resistant.

- Capacity: 6PCS /12 minute (It takes 12 minutes for one injection cycle for 60130 product).

- Nitrogen (consistent with glove box working gas) : ≥ 0.4Mpa.

- Voltage: Single Phase AC220V, Power: 1KW.

- Filling part: L900× W 470× H870 mm, Control box:L600mm*W450mm*H1500mm for reference

Site environmental requirements:

- Power supply：220V，50HZ, Voltage fluctuation range：+10%～–10%；

- Power :1KW

- Vacuum source: 10 L/s，-98KPa above；

- Nitrogen (consistent with glove box working gas)：≥0.4MPa；0.2 m³/min

- Ground load-bearing requirements: above 0.3T/m2 Above.

- Working temperature:15～30℃, humidity:30～80％Rh

PRODUCT DISPLAY

Manual Scanning and Weighing

 Skype : amywangbest86

 Whatsapp/Phone number : +86 181 2071 5609