Insulating Tape Sticking Machine For Thin-Film Solar Cell Manufacturing

The laminating machine is used in the thin-film solar cell substrate and backplane packaging line.

This machine is composed of automatic butyl tape application system, automatic butyl tape release and collection system, chip automatic transmission and positioning system, and control system.

This machine consists of automatic bus bar system, automatic bus bar release system, automatic positioning transmission system and control system.

This machine consists of two or three sets of roll-on glue heads, including automatic taping conductive adhesive system, automatic tape release and collection system, automatic positioning and transmission system and control system.

The TOB-WIP-7-20-600 warm isostatic press is a high temperature equipment that presses materials under high temperature and high pressure to improve material density and performance. Warm Isostatic Pressing (WIP) is a critical manufacturing step in the production of high-performance solid-state batteries. Its primary function is to address the fundamental challenge of poor solid-solid interfaces inherent in SSBs and to significantly enhance the density and contact integrity of the electrode and electrolyte components.

99% High Purity 40-50nm Nano Grade SiC Powder Suppiler SPECIFICATIONS Packing: 100g/bag Product Name SiC powder Nano grade Color Grey green Crystal form Cubic crystalloid Particle size 40-50nm SIC Content > 99 % F.C 0.050 wt% T.O 0.100 wt% F.Si 0.020 wt% N 0.001 wt% S 0.001 wt% Cu 0.001 wt% Fe 0.001 wt% Cr 0.001 wt% Ni 0.001 wt% Co 0.001 wt% Na 0.001 wt% Al 0.001 wt% Zn 0.001 wt% W 0.001 wt% PACKAGE AND SHIPPING 1 Standard exported package : Internal plastic bottle sealing, outside the aluminum-plastic composite membrane sealing 2 Shipping by express, by air, by sea according to customer's requirements to suggest the most suitable shipping mode SERVICES 1 We supply machines with battery technology support. 2 We can also supply a full set of materials for lithium battery including polymer battery, cylinder battery, mobile phone battery, EV battery. 3 We can also supply a full set of lithium battery equipment for lab research, pilot scale research and production line. 4 We can also supply a full set of battery technology for battery design, research and producing. We cooperated with each other, and we will do TOP OF THE BEST battery  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

Electrical Conductivity Meter With Temperature Compensation Function（-5.0～135.0）℃ SPECIFICATIONS This TOB-DDSJ-318 electrical conductivity meter Can test Electrical conductivity, Electrical resistivity, TDS, Salinity, Temperature for （-5.0～135.0）℃ Model Conductivity Meter With Temperature Compensation  TOB-DDSJ-318 Source voltage AC 220V/110V, 50/60HZ Warranty One year limited warranty with lifetime support Advantages 1 Can test Electrical conductivity, Electrical resistivity, TDS, Salinity, Temperature 2 Adopt microprocessor technology, with automatic temperature  compensation, automatic calibration, automatic switch range, etc 3 Big screen, blue backlight, double digital display LCD  4 With standard RS - 232 and USB interface, can connect with PC Testing range Electrical conductivity : 0.000μS/cm～199.9ｍS/cm Electrical resistivity : 5.00Ω.cm～20MΩ.cm TDS : 0.000 mg/L～19.99g/L Salinity : (0.0～8.00)% Temperature :（-5.0～135.0）℃ Resolution ratio Electrical conductivity : 0.001μS/cm、0.1ｍS/cm  Electrical resistivity : 0.1Ω.cm TDS : 0.001 mg/L  Salinity :0.01% Temperature : 0.1℃ Testing error Electrical conductivity : ±0.5％FS  Electrical resistivity : ±0.5％FS TDS : ±0.5％FS Salinity :±0.1% Temperature : ±0.3℃ Constant conductance pool with  best conductivity measurement range Electrode constant (cm-1) 0.01 0.1 1 10 Test range (μS/cm) 0.-19.99μS/cm 2-199.9μS/cm 20.0μS/cm- 19.9ms/cm 200μS/cm- 199.9ms/cm Temperature compensation scope （-5.0～135.0）℃ Dimension(L*W*H)  250×195×100mm Weight About 2kg  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

TOB-PTL-MM02 program-controlled dip coating machine through pulling wire, vertical immersion to pull the sample, the sample impregnated in liquid film material for a period of time and then pulled out, so that the sample surface cover a certain thickness of film.