Solid state Batteries

The theoretical basis and battery structure of sodium ion battery (Na-ion batteries) and lithium ion battery are very similar. Liquid sodium-ion batteries (like solid-state lithium-ion batteries, are also being investigated) are composed of positive electrode, negative electrode, current collector, electrolyte, and battery separator.  Among them, electrolyte and separator basically follow the lith...

Prussian Blue Cathode Materials for Aqueous Sodium-ion Batteries: Preparation and Electrochemical Performance Author：LI Yong. Prussian Blue Cathode Materials for Aqueous Sodium-ion Batteries: Preparation and Electrochemical Performance. Journal of Inorganic Materials[J], 2019, 34(4): 365-372 doi:10.15541/jim20180272 TOB New Energy can provide a full set of battery material and battery equipment fo...

The development of electric vehicles is in full swing, and the power battery is one of the most important parts. Its development has a decisive effect on the battery life and safety of electric vehicles. Recently, we often hear some terms such as solid-state batteries, SVOLT’s jelly batteries, NIO’s Nickel 55 ternary Cell, IM Motors doped with silicon to supplement lithium, and CTP/CTC technology....

MOF/Poly(Ethylene Oxide) Composite Polymer Electrolyte for Solid-state Lithium Battery LIANG Fengqing, WEN Zhaoyin 1. CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China 2. Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China Abstract Solid...

Na3Zr2Si2PO12 Ceramic Electrolytes for Na-ion Battery: Preparation Using Spray-drying Method and Its Property Author：LI Wenkai, ZHAO Ning, BI Zhijie, GUO Xiangxin. Na3Zr2Si2PO12 Ceramic Electrolytes for Na-ion Battery: Preparation Using Spray-drying Method and Its Property. Journal of Inorganic Materials, 2022, 37(2): 189-196 DOI:10.15541/jim20210486 Abstract Na-ion batteries, which currently use ...

Sergiy Kalnaus, et al. Solid-state batteries: The critical role of mechanics. Science. 381, 1300 (2023). Solid-state batteries with lithium metal anodes have the potential for higher energy density, longer lifetime, wider operating temperature, and increased safety. Although the bulk of the research has focused on improving transport kinetics and electrochemical stability of the materials and inte...

Recent progress on anode for sulfide-based all-solid-state lithium batteries —— Part 1 Lithium metal anode Author: JIA Linan, DU Yibo, GUO Bangjun, ZHANG Xi 1. School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200241, China 2. Shanghai Yili New Energy Technology Co. , LTD. , Shanghai 201306, China Abstract All-solid-state lithium batteries (ASSLBs) exhibit higher energy den...

Continuing from the previous article Recent progress on anode for sulfide-based all-solid-state lithium batteries —— Part 2 other anodes Author: JIA Linan, DU Yibo, GUO Bangjun, ZHANG Xi 1. School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200241, China 2. Shanghai Yili New Energy Technology Co. , LTD. , Shanghai 201306, China Lithium alloy anode Due to severe interfacial s...

Author: XIA Qiuying, SUN Shuo, ZAN Feng, XU Jing, XIA Hui School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094, China Abstract All-solid-state thin film lithium battery (TFLB) is regarded as the ideal power source for microelectronic devices. However, the relatively low ionic conductivity of amorphous solid-state electrolyte limits the improveme...

In recent years, there has been rapid development of sulfide solid electrolytes including Li2S-SiS2, Li2S-B2S3, Li2S-P2S5, Li(10±1)MP2S12(M=Ge, Si, Sn, Al, P),  Li6PS5X(X=Cl, Br, I). In particular, the thio-LISICON structure sulfide, represented by Li10GeP2S12 (LGPS), exhibits extremely high room temperature lithium ion conductivity of 12mS/cm exceeding that of liquid electrolytes, which has parti...

Why are all-solid-state batteries an industry trend? High security: The safety issues of liquid batteries have always been criticized. The electrolyte is easily flammable under high temperature or severe impact. Under high current, lithium dendrites will also appear to pierce the separator and cause short circuit. Sometimes the electrolyte may undergo side reactions or decompose at high temperatur...

The inconsistency of energy storage batteries mainly refers to the inconsistency of parameters such as battery capacity, internal resistance, and temperature. Our daily experience is that when two dry batteries are connected in positive and negative directions, the flashlight will light up, and we don’t consider consistency. However, once batteries are used on a large scale in energy storage syste...

Improving the initial coulombic efficiency of lithium-ion batteries is a complex and important topic, which is directly related to the energy utilization and overall performance of the battery. The following is an in-depth analysis of the factors affecting the first coulombic efficiency of lithium-ion batteries from multiple perspectives, and proposes corresponding solutions. 1.Factors affecting t...

Recently, Professor Zhang Qiang's team from the Department of Chemical Engineering at Tsinghua University published the research results on the bulk/surface interface structure design of lithium-rich manganese-based cathode materials for all-solid-state metal lithium batteries. They proposed an in-situ bulk/surface interface structure regulation strategy, constructed a fast and stable Li+/e−pathwa...

WANG Kunpeng ,1, LIU Zhaolin2, LIN Cunsheng2, WANG Zhiyu ,1,2 1. State Key Lab of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China 2. Branch of New Material Development, Valiant Co., Ltd., Yantai 265503, China Abstract In comparison to Li-ion batteries, Na-ion batteries offer the benefits of low cost, good low-temperature performance, and safety...

Solid-state batteries and liquid batteries have many similarities in manufacturing processes. For example, the manufacturing process of electrode sheet is based on slurry mixing, coating and calendering. After slitting, the tabs are welded and PACK (battery packs are processed into groups). However, there are also some differences. There are three core differences: 1) Composite cathode materials f...

The global race for the next generation of energy storage is centered on Solid-State Batteries (SSBs). While the potential for higher energy density and enhanced safety is clear, the transition from lab-scale prototypes to mass production remains a challenge. One of the most critical hurdles is ensuring perfect interface contact between solid electrolytes and electrodes. To bridge this gap, we are...