Forming Machine

TOB-CK150 Aluminum laminated film punching forming machine is used for lithium polymer battery/ pouch cell cup forming in the production line of making pouch cell batteries.

TOB-SCK200 Battery Pouch Forming Machine is used for lithium polymer battery/ pouch cell cup forming in the production line of making pouch cell batteries.

TOB-CXJ200 Pouch Forming Machine is used for lithium polymer battery/ pouch cell cup forming in the laboratory and production line of making pouch cell batteries.

TOB-SCX-300 Manual Aluminium Punching Machine is used for lithium polymer battery/ pouch cell cup forming in the production line of making pouch cell batteries.

TOB-SCX-400 Manual pouch cell case forming machine is used for lithium polymer battery/ pouch cell cup forming in the production line of making pouch cell batteries.

TOB-SCK700 Pouch Forming Machine is used for lithium polymer battery/ pouch cell cup forming in the laboratory and production line of making pouch cell batteries.

This TOB-RY200 hot press machine is a 200*200mm size hot press machine for battery cells.

This TOB-D-RY300 press machine is a manual hot press machine for lithium ion pouch cells pressing.

This machine is used for lithium polymer battery pouch continuous and automatic punching forming.

Automatic high-precision electrode forming machine SPECIFICATIONS TOB-LPC520 series machine technical parameters: Forming speed 20-30 punching  per minute. Maximum electrode width 520mm (actual maximum 540mm) The largest size electrode forming 500mm*500mm Electrode thickness 0.06 ~ 0.25mm Cutter life about 30,000 times Forming burr ≤0.015mm After punching the edges dusting ≤0.15 mm PET conveyor belt life recycling approximately 10,000~30,000 times Electrode box size according to customer-supplied Failure rate of the device ≤5% (only caused by the equipment failure) Power  required 6.0KW Voltage AC380V ± 10% Air pressure required 0.5 ~ 0.7Mpa Vacuum required -90Kpa ~ -60Kpa Weigh 4000KG Dimension (approx) length: 4300MM * Width: 2000MM  * High: 1850MM Other: According to electrode specifications provided by the customer, provide a laser sheet die cutter free.  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

For lithium batteries aluminum plastic composite film monolithic manually stamping molding.

The manual hot pressing shaping machine is suitable for flexible packaging batteries.

This device is mainly used for flexible packaging lithium batteries manual hot side setting process.

512 Channel Battery Formation and Grading Tester

This TOB-W16CH-5V6A hot press formation machine is mainly used for the lithium-ion pouch cell formation under the hot pressing state.

TOB-SCK-300 Battery Pouch Forming Machine is used for lithium polymer battery/ pouch cell cup forming in the production line of making pouch cell batteries.

5V3A 768 Channel Battery Formation and Grading Tester，double-sided structure, each battery forming machine can control and detect 768 Ni-MH or Cd-Ni batteries by constant current charging and discharging.

5V2A Cylinder battery cell forming and grading machine,Constant current-constant voltage power supply, constant current to constant voltage switching without impact, especially suitable for lithium ion battery charging requirements

Each equipment can do constant current,constant voltage charge and constant current discharge for 256 pcs of cell which is within the voltage range.especially suitable for lithium ion battery charging requirements.

Mainly composed of a communication interface and a battery detection cabinet. The battery testing cabinet is composed of battery clamp and a plate body to placing fixture, a constant current constant voltage source, a registration control circuit, a sampling circuit, a single chip microcomputer and a control panel.