Vacuum Laboratory Slurry Filter

TOB-FT30 Vacuum filter is a vacuum filter machine with 30 liter containers and complete accessories for immediate use.

TOB-LB-FT02 is a CE Certified magnetic de-ironing filtration system for lab use.

This TOB-GL-5L battery slurry feeding system is convenient for battery capacitance and various process coating material, can also be applied to various slurry supply.

TOB-SF-08 is an automatic battery slurry feeding machine with peristaltic feeding Pump and stainless steel reservoir for battery electrode preparation

Surface Area and Pore Size Analyzer For Powder Material Research SPECIFICATIONS Power Voltage: 100V~220V ± 10V  Frequency: 50/60Hz Maximum power: 300W Connection: grounding, single-phase power socket Physical properties Length: 60cm (23.6 inches) Width: 48cm (18.9 inches)   Height: 74cm (29.1 inches) Weight: 60kg (132.3 lbs) Accessories Weight: 30kg (66.1 lbs )  Installation requirements (L * W) 100 * 60cm (not including space computers taking up) Functions  ● Surface area measurement: BET surface area (Single-point and multi-point), Langmuir surface area, T-plot method outer surface area,  T-plot method the total inner surface area of microporous, BJH adsorption cumulative surface area of the total pore, BJH desorption cumulative surface area of the total pore ● Determination of pore volume: Single point total pore volume,BJH adsorption cumulative total pore volume    BJH desorption cumulative total pore volume    T-plot method the total pore volume of micropore ● Determination of average pore size:    Adsorption average pore diameter   BJH adsorption average pore diameter   BJH desorption average pore diameter   The most frequency pore ● Pore size distribution:   BJH adsorption and desorption differential pore size distribution (dV / Dr-D) and (dV / dlogD-D)   BJH adsorption and desorption integral distribution (or cumulative distribution)   MP method micropore distribution Technical Parameters Test principle: the static volumetric method, gas adsorption; Analysis Models: BET, Langmuir, BJH, t-plot, DR, MP and NLDFT; Measuring range: surface area ≥ 0.005M2/g, no upper limit; pore size 2 _ 500nm; pore volume 0.0001cc/g, no upper limit; Sorption gas: N2 (high purity); Ar, Kr, CO2, etc. available Analysis No: Two independent analysis ports  Degassing stations: Two Sample Type: powders, granules, fibers, flakes and other materials  Sensor：Two sensors, 0_1000 torr P.S (0_133kpa);  Test Efficiency: multi-point BET surface area _12 minutes per sample; Determination pore size distribution from adsorption isotherms _1.5h per sample;  Determination pore size distribution from adsorption and desorption isotherms _3.5 h per sample. Nitrogen Partial Pressure: P/Po 4×10-5 _ 0.998, the minimum resolvable relative pressure  5 × 10-5 Ultimate vacuum: 4.0 × 10-2Pa（3×10-4  torr） Pressure Accuracy: ≤ ± 0.15% (F.S) Repeatability accuracy: surface area ≤ ±1.0 % （surface area）;  ≤2nm (pore size) Operation Mode: Automatic  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

This TOB-ET3801 dry block temperature calibrator is easy to carry, easy to use, easy to fast and reliable temperature accuracy, widely used in machinery, chemical industry, food, pharmaceuticals and other industries.

Button super capacitor automatic production line SPECIFICATIONS Functional overview The production line is set automatically into the positive case, the negative case, the pole piece, the diaphragm, liquid injection, positive and negative combinations, fill pressure, sealing as one of the fully automated production lines. According to the user's process requirements, development, and manufacturing sections of semi-automatic production lines. Technical parameters Supercapacitor monomer diameter φ6.8 ~ 24.5mm  Supercapacitor monomer height 1.6 ~ 3.0rnm Pole piece width 8 ~ 200mm For the separator roll diameter