tester

Computer Control Power Battery Crush Testing Machine SPECIFICATIONS 1.Technical requirements Model Computer Control Power Battery Crush Testing Machine   TOB-BE-6045C Source voltage 3∮5W  380V 50HZ 5000W Dimension(W*D*H) 1200W*1100D*1800H Weight 1500kg Max pressure 10t,20t,30t,50t,80t,100t Force value Resolution 1/100,000 Force error ±1% Drive mode Electro-hydraulic servo drive Extrusion speed 1~200MM/S(Adjustable) Unit Conversion KG/N/LB Test space 600W*600D*600H MM (customized) Voltage acquisition frequency 200times/S Temperature acquisition frequency 2 channels,2times/S Test hole On the left,50mm diameter hole attached a stainless  steel lid Visual window Double-proof glass300*300MM and affixed with  explosion-proof film, and with steel mesh 2.Standard configuration Item Quantity Host and protective box 1set Computer Cabinets 1set Lenovo computer 1set Surveillance camera system 1set Voltage acquisition system 1set Temperature acquisition system 1set Wavy extrusion plate 1set Round-shaped extrusion plate Customizable Factory inspection report 1set Stainless steel tray 1set  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

Horizontal Computer Control Power Battery Crush Testing Machine  SPECIFICATIONS 1.Technical requirements Model Horizontal Computer Control Power Battery Crush Testing Machine   TOB-BE-AP-6045 Source voltage 3∮5W  380V 50HZ 5000W Dimension(W*D*H) 2500W*1000D*1000H MM Weight 1500kg Max pressure 10t,20t, 50t,80t Battery size 500W*500D*500H MM，Customized 1000*1000*1000 or bigger Force error ±1% Drive mode Electro-hydraulic servo drive Extrusion speed 0.1~500MM/S(Adjustable) Unit Conversion kgf，lbf，N，KN，Kpa，Mpa Stroke Resolution 0.005mm Data collection frequency 200times/S Signal transmission mode RS 232 or USB Test hole On the left,50mm diameter hole attached a stainless  steel lid Visual window Double-proof glass800*300MM and affixed with  explosion-proof film, and with steel mesh 2.Standard configuration Host  1set Brand computer 1set Color Inkjet Printer 1set Surveillance camera system 1set Voltage acquisition system 1set 8 channels temperature acquisition system 1set Special - shaped extrusion plate 1set Round-shaped extrusion plate 1set Operating Instructions 1set Factory inspection report 1set  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

Battery short circuit tester for pouch cell film and tab after top-side sealing.

5V5ma Coin Cell Battery Tester

512 Channel Battery Formation and Grading Tester

TOB-BK-300A battery internal resistance tester is a kind of new instrument using alternating current test battery internal resistance, It can measure voltage at the same time, the operation is simple and practical. The resistance tester adopts four-wire clamp, effectively eliminate the measuring error caused by the contact resistance, it can set unqualified alarm for resistance testing

5V2A The battery grading and formation system is specially used for lithium ion Cylindrical Cell 18650 battery Formation and grading.

0-120V Smart battery impedance test equipment For Alkaline batteries, lead-acid batteries, lithium ion battery, button battery and supercapacitor ESR Testing.

Lithium ion Battery Testing Equipment is used for pouch cell, cylinder cell, coin cell parameter testing,  it can test voltage, cycle life, capacitry and resistance.

TOB-5V50mA Battery Test Equipment is an eight-channel battery analyzer to analyze small coin cells with a range current 0-50mah, voltage 0-5v. Each channel of the analyzer has independent constant-current and constant-voltage source, which can be programmed and controlled by computer software.

TOB-VFC-800 This product is a 800mm long cast coater, which contains a vacuum chuck and an oil-free vacuum pump. It can be used to make long thick films with a micron adjustable blade.

This Battery Crush Nail Penetration Test Machine is designed to simulate actual using environments for the lithium battery.

Fineness board is used to measure the fineness of dispersed products during production, storage and application, such as: battery paste, paint, plastic, pigment, printing ink, paper, ceramics, medicine, food, etc

Three ranges in one tester.Range1:5uA~1mA,Range2: 1mA~25mA, Range 3: 25mA~50mA Range1: 2uA,Range2: 50uA, Range 3: 100uA

TOB-CT-4008-5V10mA-164 Button Battery Tester is an eight-channel battery analyzer to analyze small coin cells with a range current 0-10mah, voltage 0-5v

TOB-CT4008-5V6A-S1 Battery tester equipment is an eight-channel battery analyzer to analyze polymer battery and cylindrical batteries from 0.5mA to 6A, up to 5V

TOB-VFC-300 The film coating machine is mainly used for lithium battery electrode coating for coin cell assemble and pouch cell research.

New energy pouch cell and button cell constant temperature test.

5V3A 768 Channel Battery Formation and Grading Tester，double-sided structure, each battery forming machine can control and detect 768 Ni-MH or Cd-Ni batteries by constant current charging and discharging.

5V2A Cylinder battery cell forming and grading machine,Constant current-constant voltage power supply, constant current to constant voltage switching without impact, especially suitable for lithium ion battery charging requirements