Lab Furnace

The furnace uses silicon molybdenum rod as the heating element, adopts double-layer shell structure and 31 section program temperature control system, phase-shifting trigger and silicon controlled control, and the furnace adopts alumina ceramic fiber, vacuum formed fiber light plate material.

This TOB-Q1100-504040 atmosphere furnace uses silicon molybdenum rod as heating element, double-layer shell structure and 30-stage program temperature control system, phase shift triggering, thyristor control, furnace high quality high purity alumina fiber, vacuum forming fiber poly light board material .   A double furnace structure is used.   The furnace has the advantages of temperature field balance, low surface temperature, fast temperature rise and fall, and energy saving.

1200℃Intelligent Chamber Atmosphere Furnace The vacuum system of the atmosphere furnace adopts special design technology, which ensures safe and convenient operation, good vacuum degree, and an ultimate vacuum degree of up to 100PA. It also boasts good sealing performance and long vacuum holding time.

600℃Intelligent Chamber Atmosphere Furnace The vacuum system of the atmosphere furnace adopts special design technology, which ensures safe and convenient operation, good vacuum degree, and an ultimate vacuum degree of up to 100PA. It also boasts good sealing performance and long vacuum holding time. 

This TOB-Q1200-40 high-temperature furnace uses imported resistance wire as heating element, adopts double shell structure and 31 section program temperature control system, phase-shifting trigger and silicon controlled control.

The molybdenum vacuum belt furnace is widely used in laboratory, industrial and mining enterprises, scientific research units of preliminary experiment.

1100 Degree 7.2L Volume Laboratory Inert Gas Muffle Furnace SPECIFICATIONS The TOB-KBF11Qlaboratory inert gas muffle furnaceadopts Electric resistance wire as heating element with fast temperature rising. (up to 1000degrees within 30mins). 40 segments programmable temperature controllers are installed with 6 groups of PID adjustment. ThisAtmosphere muffle furnaceis the ideal laboratory equipment for universities, research institutes, industrial and mining enterprises to do atmosphere intering , Atmosphere reduction. Model Dimension (D*W*H) Power Voltage Max Heating Temperature TOB-KBF11Q-I 300*200*120mm 2.5kw AC110V/220V 1100℃ TOB-KBF11Q-II 300*200*200mm 4kw TOB-KBF11Q-III 300*250*250mm 5kw TOB-KBF11Q-IV 400*300*300mm 9kw 380V Heating element Electric resistance wire Temperature controller 40 program temperature control system, With over temperature, broken accidentally protection function, 6 groups of PID adjustment Control precision of + / - 1 ℃ Furnace chamber  Polycrystal alumina fiber Pressure measure system Pressure gauge  Air intake control Flow meter Air source H2, Ar, N2, O2, CO, Etc. Warranty One year limited warranty with lifetime support  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

1100 ℃ atmosphere chamber furnace

1300 Degree Inert Atmosphere Muffle Furnace For Powder Materials Atmosphere Sintering SPECIFICATIONS The TOB-KBF13Q Inert Atmosphere Muffle Furnace adopts Silicon carbide as heating element. 40 segments programmable temperature controllers are installed with 6 groups of PID adjustment. ThisAtmosphere muffle furnaceis the ideal laboratory equipment for universities, research institutes, industrial and mining enterprises to do atmosphere Sintering , Atmosphere reduction. Model Dimension (D*W*H) Power Voltage Max Heating  Temperature TOB-KBF13Q-I 160*150*150mm 3kw AC110V/220V 1300℃ TOB-KBF13Q-II 200*200*200mm 6kw TOB-KBF13Q-III 300*200*200mm 8kw TOB-KBF13Q-IV 300*250*250mm 10kw 380V TOB-KBF13Q-V 400*300*300mm 13kw Heating element Silicon carbide Temperature controller 40 program temperature control system, With over temperature, broken accidentally protection function, 6 groups of PID adjustment Control precision of + / - 1 ℃ Furnace chamber  Polycrystal alumina fiber Pressure measure  system Pressure gauge  Air intake control Flow meter Air source H2, Ar, N2, O2, CO, Etc. Warranty One year limited warranty with lifetime support  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

1400 ℃ vacuum box atmosphere furnace

1400 ℃ atmosphere chamber furnace

1600℃ High Temperature Muffle Furnace For Powder Materials Atmosphere Sintering SPECIFICATIONS The TOB-KBF16Q High Temperature Muffle Furnace adopts Silicon carbide as heating element. 40 segments programmable temperature controllers are installed with 6 groups of PID adjustment. ThisAtmosphere muffle furnaceis the ideal laboratory equipment for universities, research institutes, industrial and mining enterprises to do atmosphere Sintering , Atmosphere reduction. Model Dimension (D*W*H) Power Voltage Max Heating  Temperature TOB-KBF16Q-I 160*150*150mm 3kw AC110V/220V 1600℃ TOB-KBF16Q-II 200*200*200mm 6kw TOB-KBF16Q-III 300*200*200mm 8kw TOB-KBF16Q-IV 300*250*250mm 10kw 380V TOB-KBF16Q-V 400*300*300mm 13kw Heating element Silicon carbide Temperature controller 40 program temperature control system, With over temperature, broken accidentally protection function, 6 groups of PID adjustment Control precision of + / - 1 ℃ Furnace chamber  Polycrystal alumina fiber Pressure measure  system Pressure gauge  Air intake control Flow meter Air source H2, Ar, N2, O2, CO, Etc. Warranty One year limited warranty with lifetime support  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

1600 ℃ atmosphere chamber furnace

1700 ℃ atmosphere chamber furnaces SPECIFICATIONS Model TOB-DSP-GF1700-I TOB-DSP-GF1700-II TOB-DSP-GF1700-III TOB-DSP-GF1700-IV TOB-DSP-GF17-V Power 3KW 5KW 7 KW 9KW 13 KW Furnace tube size(mm) 160X150X150 200X200X200 300X200X200 300X250X250 400X300X300 Dimension 550X 470X860 600X 510X910 600X610X940 650X 610X990 700X 710X1355 Power supply voltage 220V 380V Phase number Single-phase Heating element 1800 type silicon molybdenum rod Temperature control mode 一.Yudian temperature control 30 sections can only use PID temperature regulation. 二.FP93 temperature control (from Japan) (Replace imported instruments, for an additional fee) 1,40 section program temperature control can be divided into 4,2,1 group program,  if the program is divided into four groups, each program segment 10, 2,6 group PID control, low, medium and high temperature can each with a set of PID,  such that each segment is capable of controlling the temperature is very accurate. Control accuracy +/- 1 ℃ Triggers 1.Phase trigger (with soft start and current limiting function) 2.Current limiting function: no matter how to adjust the heating time,  our furnace transformer secondary current through the post is limited to 160A,  limited protection of equipment, no matter how you operate, the device will not burn. 3.Soft-start function: When the power current will slowly increase, the impact on the heating element is small, help extend the life of the heating element SCR 106 / 16E Germany Semikron Max temperature 1700 ℃ Rated temperature 1650 ℃ Heating rate ≤20 ℃ / Min (available upon request modification) Recommended heating rate ≤10 ℃ / Min   Thermocouple Type Type B Certification CE Surrounding surface temperature ≤45℃ Maximum temperature use in a variety of atmosphere  Atmosphere Max temperature NO2,CO2,O2,Air 1700℃ He,Ar,Ne 1650℃ SO2 1600℃ CO,N2 1500℃ Wet H2 1400℃ Dry H2 1350℃  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

1700 ℃ Vacuum atmosphere furnace of hydrogen

The furnace chamber is made of imported alumina fiber material with a unique design, which is durable, has good thermal insulation performance, and will not collapse. The heating element adopts a silicon-molybdenum rod, greatly improving its service life.

1100 Degree Vertical Tube Furnace With Vacuum Pump Optional And Quartz Tube Dia 50*1000mm SPECIFICATIONS The TOB-VTL1100vertical tube furnaceadopts Electric resistance wire as heating element with fast temperature rising. (up to 1000degrees within 20mins). 40 segments programmable temperature controllers are installed with 6 groups of PID adjustment. Thislaboratory tube furnaceis the ideal laboratory equipment for universities, research institutes, industrial and mining enterprises to do High temperature atmosphere sintering, Atmosphere reduction, CVD experimental, vacuum annealing such as for preparing nano materials and film. Model Tube Size Power Voltage Heating Zone  Length Max Heating  Temperature TOB-VTL1100-I Φ50*1000mm 2.5kw AC110V/220V 450mm 1100℃ TOB-VTL1100-II Φ70*1000mm 4kw TOB-VTL1100-II Φ100*1000mm 7kw Heating element Electric resistance wire Temperature controller 40 program temperature control system, With over temperature, broken accidentally protection function, 6 groups of PID adjustment Control precision of + / - 1 ℃ Furnace chamber  Polycrystal alumina fiber Tube material Gas refining quartz tube (or corundum tube) Vacuum Flange &  Fitting Ports Stainless steel flange with Gas nozzle, valve, pressure gauge Pressure measure  system Pressure gauge (Resistance vacuum gauge can be chosen according requirements) Air intake control Flow meter (Protons flow controller can be chosen according requirements ) Vacuum system Vacuum pump can be chosen Warranty One year limited warranty with lifetime support  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

High Temperature 1700℃ Crucible Furnace For Powder Sintering SPECIFICATIONS Thiscrucible furnaceadopts silicon molybdenum rods as heating element, using 708P type intelligent temperature control instrument and B double platinum rhodium thermocouple together to adjust the internal temperature of the furnace temperature measurement, automatic control. Thiscrucible furnacehas maximum temperature of 1700 ℃ For high temperature sintering. Model 1700℃ Crucible Furnace    TOB-LCF-1700C Heating mode Silicon molybdenum bar heating Furnace effective size Φ200*180mm Working temperature ≤1700℃ Max temperature 1700℃ Temperature rising speed 10℃/min Temperature accuracy  ±1℃ Source voltage AC110V/220V   50/60HZ Heating power 6.5kw General dimension 480*500*950mm Weight 110kg Structure 51 steps programmable intelligent control Fiber inner materials for temperature up to 1700℃ Lift model at bottom, simple for operation Standard configure 1pcs crucible tongs, 1pair High temperature gloves,  2pcs heating elements, 1pcs thermocouple. Warranty One year limited warranty with lifetime support  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

1200 Degree Box Chamber Furnace This furnace has the advantages of balanced temperature field, low surface temperature, fast temperature rise and fall rate, and energy conservation. It is a special and ideal equipment developed for high-temperature sintering, high-temperature annealing, melting, and analysis in universities, research institutions, and industrial and mining enterprises.

1400 Degree Box-type High Temperature Furnace This furnace has the advantages of balanced temperature field, low surface temperature, fast temperature rise and fall rate, and energy conservation. It is a special and ideal equipment developed for high-temperature sintering, high-temperature annealing, melting, and analysis in universities, research institutions, and industrial and mining enterprises.