-
In lithium battery manufacturing, the often-overlooked A/B-side coating misalignment issue during the coating process significantly affects battery capacity, safety, and cycle life. Misalignment refers to inconsistencies in the positional alignment or thickness distribution of coatings on the front and back sides of electrodes, which can lead to risks such as localized lithium plating and mechanic...
read more
-
In lithium-ion battery manufacturing, the fineness of the slurry (mainly referring to the electrode slurry) is a key parameter affecting electrode performance (such as capacity, rate capability, cycle life, safety) and process stability. Different battery types have significantly different fineness requirements for the slurry (usually measured by particle size distribution indicators such as D50, ...
read more
-
I. Characteristics and Advantages of Polyacrylate (PAA) Binders Minimal Swelling in Electrolyte Solvents: Exhibits low swelling, maintaining structural integrity of electrode sheets during charge/discharge cycles. High Proportion of Carboxyl Groups: The high density of polar carboxyl groups forms strong hydrogen bonds with hydroxyl-containing active materials, enhancing dispersion stabil...
read more
-
Self-discharge in lithium-ion batteries refers to the phenomenon where the battery's charge/voltage naturally decreases when disconnected from an external circuit (i.e., in an open-circuit state). This is an inherent characteristic of all batteries, though the degree varies. Lithium-ion batteries exhibit a relatively low self-discharge rate but are still affected. The primary causes can be categor...
read more
-
Lithium-ion battery stacking technology is a critical process in cell manufacturing, directly impacting performance, safety, and production efficiency. At TOB NEW ENERGY, we specialize in providing turnkey battery production line solutions and cutting-edge equipment tailored to optimize these advanced processes. Currently, four primary stacking technology routes dominate the industr...
read more
-
In the pursuit of higher energy density for lithium-ion batteries, silicon-based anodes have emerged as a promising candidate. However, their commercialization is hindered by challenges such as significant volume expansion and, critically, non-uniform lithiation. This article explores the causes, detrimental effects, and advanced solutions to mitigate this issue, a key consideration for anyon...
read more
-
I. Precise Deconstruction of Task Objectives Task objective deconstruction is a foundational aspect of cell development. Whether for new product development or the ongoing maintenance of mass-produced products, clearly and logically breaking down goals is crucial. Complex indicators must be layered and refined, then systematically assigned to relevant departments. This ensures each department unde...
read more
subscribe to us 
中文
français
Deutsch
italiano
español
português
Nederlands
日本語
한국의
