Battery and Supercapacitor Safety Tester

This TOB-8102 temperature control short circuit tester is designed in compliance with various battery short circuit testing standards, meets specifications including GB, IEC, EN, UN38.3, and UL. According to standard requirements, the temperature control short circuit tester must feature an internal resistance well below 100mΩ to achieve the maximum short-circuit current specified for testing.

This TOB-SKT-10 battery mechanical shock tester is mainly applicable to shock resistance tests in such fields as electronic products, aerospace, shipping, military industry, automotive parts and transportation. Shock tests in form of half sine wave, final peak saw tooth wave or trapezoidal wave shock tests can be carried out by selecting different waveform generators.

This TOB-8106 battery impact tester is specially designed for testing battery safety performance through different hammer and different stress areas from different height. The battery verifies as qualified on the condition of no flames or explosion after this heave impact test.

This TOB-8103 thermal abuse test chamber is mainly applied for battery safety testing, industrial products drying, thermal treatment etc.

This TOB-EV-203 battery safety vibration test system is designed to simulate real-world mechanical vibration environments and subject lithium-ion batteries to controlled vibration profiles. Its primary purpose is to evaluate the structural integrity, electrical performance, and safety of lithium-ion battery cells, modules, or packs under sustained vibration stress.

This TOB-BTT-408A lithium-ion battery high-low temperature alternating test chamber mainly used for cell, electric and electronic products,components and other materials high low temperature test,temperature change,damp heat etc. Environment simulate reliability test.

This TOB-KS5-800C temperature cycling tester mainly used for battery and electronic products, components and other materials high low temperature test, temperature change, etc. Environment simulate reliability test.

TOB-KS5-150C Mainly used for Single cell and electronic products,components high low temperature test,temperature change etc. Environment simulate reliability test.

TOB-8401 Thermal runaway test of battery unit and thermal runaway expansion test of rechargeable energy storage system.

This high and low temperature chamber is mainly used for cells, electric and electronic products,components and other materials high low temperature test,temperature change, damp heat etc. Environment simulate reliability test.

This temperature environmental test chamber mainly used for electric and electronic products,components and other materials high low temperature test,temperature change,damp heat, etc.

This Battery Crush Nail Penetration Test Machine is designed to simulate actual using environments for the lithium battery.

Suitable for battery low pressure (high attitude) simulation test, all the testing specimen are being tested under 11.6kPa (1.68psi) 

This battery burning fire tester is necessary testing equipments for various battery manufacturer, quality inspection & control department.

This aging test chamber is mainly used for battery high temperature test, constant temperature test.

This over charge explosion-proof box is used to prevent explosion or burning unnecessary damage to the test personnel in the battery overcharge and over discharge.

Lithium Battery Short Circuit Tester With Temperature Control Function For 0-70℃ SPECIFICATIONS Model Temperature control battery short circuit tester TOB-BSCT-TC Warranty One Year limited warranty with lifetime support Source voltage AC 220V, 50HZ Power 3000W Short-circuit tester dimension 600*800*970mm Thermostatic explosion-proof box  500*550*500mm Weight 220kg Short-circuit current 1000A  DC response time  Less than 5us Resistance  Less than 5mΩ, customized   Remote-controlled distance  7M No barrier  Temperature range  0-70℃, adjustable Temperature fluctuation ±1℃ Temperature error ±2℃ Short-circuit time 1-9999s can be set Anti explosion case Bottom is provided with four universal wheels, and can move freely  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

The battery burning test machine is a test device used to simulate the combustion or explosion of batteries under extreme conditions (such as overheating, short circuit, extrusion, etc.). It is mainly used to evaluate the safety performance of batteries and help R&D personnel improve battery design and reduce safety risks.

Battery Temperature Cycling Testing Machine For Lithium Battery Safety Performance Testing SPECIFICATIONS Type BE-HLK -80M3 BE-HLK -150M3 BE-HLK -225M3 BE-HLK -408M3 BE-HLK-800M3 BE-HLK -1000M3 Within Volume 80L 150L 225L 408K 800L 1000L Within Feet(cm) 40*50*40 50*60*50 50*75*60 60*85*80 100*100 *80 100*100 *100 Working environment +5~+35℃ Heater Nickel-cadmium alloy strip heater Blower Centrifugal fan Airflow mode Broadband type forced air cycle (up out，down in) Condensing mode Air-cooled or water-cooled Temperature range -40℃~+150℃ Temperature fluctuation ±0.5℃ Rise time -40~+80℃＜30min，4℃/min Average，rise and fall speed customizable Fall time +80~-40℃＜30min，4℃/min Average，rise and fall speed customizable Box material Inside:Mirror stainless steel                    Outside:Mirror stainless steel or Steel spray Insulation material Rigid polyurethane foam Controller “8”show：TEMI880 Color touch smart programmable controller（Chinese-English Convertible） “3”show：TEMI300 LCD keypad controllers（English Display） Cooling system France Taikang hermetic compressors（Environmentally friendly refrigerant）   Protection device Compressor overheating, over-current, over-voltage, heating nothingr burning, over-temperature alarm system inside Power AC3∅5W 380V Standard configuration A viewing window，∅50mm Test hole，Sample holder 2set，Inside lights 4 Mobile working wheels Option Communication port，Logger，Built-in glass doors or operation hole  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

50L High and Low Temperature Alternating Test Chamber For Battery SPECIFICATIONS High and low temperature test chamber is suitable for the electrical, electronics, instrumentation, automotive electronics, electronic components, materials and other products, in the high and low temperature environment adaptability under the condition of storage and use, suitable for schools, factories, military, scientific research, and other units, to detect all kinds of electronic elements in high temperature, low temperature, alternating high and low temperature environment of various performance indicators Model High and Low Temperature Alternating Test Chamber  TOB-GD4005 Working chamber size (D*W*H) 350mm*360mm*400mm Dimension (D*W*H) 890mm*890mm*1610mm Temperature range -40℃-150℃ Temperature fluctuations ±0.5℃ Temperature uniformity ≤±2℃ Heating up time 3-5℃/min Cooling time 0.7-1℃/min Power 3.8kw Voltage AC110V/220V with grounding protect Advantages 1 Screen simple operation, easy to edit program, no key presses. 2 With 99 groups, 24 section, 99cycles of program capacity,  each step with time setting up to 99 hours and 59 minutes. 3 Heating, cooling and totally independent, can improve the efficiency and reduce the test cost,  increase longevity, reduce the failure rate  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609