Products

The TOB-BTS-6V4A Power bank tester is used for power bank quality detection, it can test the power bank capacity, voltage and life cycle performance with connecting computer.

This TOB-8102 temperature control short circuit tester is designed in compliance with various battery short circuit testing standards, meets specifications including GB, IEC, EN, UN38.3, and UL. According to standard requirements, the temperature control short circuit tester must feature an internal resistance well below 100mΩ to achieve the maximum short-circuit current specified for testing.

This TOB-SKT-10 battery mechanical shock tester is mainly applicable to shock resistance tests in such fields as electronic products, aerospace, shipping, military industry, automotive parts and transportation. Shock tests in form of half sine wave, final peak saw tooth wave or trapezoidal wave shock tests can be carried out by selecting different waveform generators.

This TOB-8106 battery impact tester is specially designed for testing battery safety performance through different hammer and different stress areas from different height. The battery verifies as qualified on the condition of no flames or explosion after this heave impact test.

This TOB-8103 thermal abuse test chamber is mainly applied for battery safety testing, industrial products drying, thermal treatment etc.

This TOB-EV-203 battery safety vibration test system is designed to simulate real-world mechanical vibration environments and subject lithium-ion batteries to controlled vibration profiles. Its primary purpose is to evaluate the structural integrity, electrical performance, and safety of lithium-ion battery cells, modules, or packs under sustained vibration stress.

This TOB-BTT-408A lithium-ion battery high-low temperature alternating test chamber mainly used for cell, electric and electronic products,components and other materials high low temperature test,temperature change,damp heat etc. Environment simulate reliability test.

This TOB-KS5-800C temperature cycling tester mainly used for battery and electronic products, components and other materials high low temperature test, temperature change, etc. Environment simulate reliability test.

TOB-KS5-150C rapid temperature cycling chamber: -40°C to +150°C, 5°C/min ramp rate, 150L. Meets IEC62133, UL1642, UN38.3 for lithium-ion cell thermal testing. Explosion-proof chains, pressure relief, and smoke vent included.

TOB-8401 Thermal runaway test of battery unit and thermal runaway expansion test of rechargeable energy storage system.

TOB-TH-80C is an 80 L temperature humidity test chamber for cells, automotive parts and electronic components. It covers -40 to +150 °C and 20 to 98 %RH, holds gradient within ±1 °C, and adds explosion-proof chains, a smoke vent and a tri-colour alarm lamp.

This high and low temperature chamber is mainly used for cells, electric and electronic products,components and other materials high low temperature test,temperature change, damp heat etc. Environment simulate reliability test.

This temperature environmental test chamber mainly used for electric and electronic products,components and other materials high low temperature test,temperature change,damp heat, etc.

This Battery Crush Nail Penetration Test Machine is designed to simulate actual using environments for the lithium battery.

Suitable for battery low pressure (high attitude) simulation test, all the testing specimen are being tested under 11.6kPa (1.68psi) 

This battery burning fire tester is necessary testing equipments for various battery manufacturer, quality inspection & control department.

This aging test chamber is mainly used for battery high temperature test, constant temperature test.

A steel over charge and over discharge explosion proof box for 18650, button and phone cells. One 500 x 500 x 500 mm chamber in 1.5 mm 304 stainless steel, two panes of explosion-proof glass, top-mounted LED, exhaust fan, rear relief port. AC 220V, 50Hz, 0.2 kW.

Lithium Battery Short Circuit Tester With Temperature Control Function For 0-70℃ SPECIFICATIONS Model Temperature control battery short circuit tester TOB-BSCT-TC Warranty One Year limited warranty with lifetime support Source voltage AC 220V, 50HZ Power 3000W Short-circuit tester dimension 600*800*970mm Thermostatic explosion-proof box  500*550*500mm Weight 220kg Short-circuit current 1000A  DC response time  Less than 5us Resistance  Less than 5mΩ, customized   Remote-controlled distance  7M No barrier  Temperature range  0-70℃, adjustable Temperature fluctuation ±1℃ Temperature error ±2℃ Short-circuit time 1-9999s can be set Anti explosion case Bottom is provided with four universal wheels, and can move freely  Email : tob.amy@tobmachine.com  Skype : amywangbest86  Whatsapp/Phone number : +86 181 2071 5609

The battery burning test machine is a test device used to simulate the combustion or explosion of batteries under extreme conditions (such as overheating, short circuit, extrusion, etc.). It is mainly used to evaluate the safety performance of batteries and help R&D personnel improve battery design and reduce safety risks.